Porsche 914 engine FS
Posted: Sat Jun 23, 2007 10:54 am
914 Engine for sale, I'm thinking now might be a good time to flog it as it's still attached to the gearbox so at least it can be seen running. The engine is out of the car as I'm swapping it for a six. I haven't taken any pics as the engine is plastered with dust from when the car was painted so looks a bit a state. Specs are:-
(EA case) 1911cc -was a 1700 but now has 96mm B+P with 8.4CR. Running on Dell 45's, 1.8 vacuum advance distributor with pertronix (not 009 rubbish), rockers machined with 911 swivel adjusters. It has a high lift cam (I measured over half " lift with dial indicator) but I've never taken the oil pump off so not sure what spec. Goes well.
Not sure really what price to ask but I'd rather sell it as complete running engine than start selling carbs separately etc.
(EA case) 1911cc -was a 1700 but now has 96mm B+P with 8.4CR. Running on Dell 45's, 1.8 vacuum advance distributor with pertronix (not 009 rubbish), rockers machined with 911 swivel adjusters. It has a high lift cam (I measured over half " lift with dial indicator) but I've never taken the oil pump off so not sure what spec. Goes well.
Not sure really what price to ask but I'd rather sell it as complete running engine than start selling carbs separately etc.
