Page 1 of 1
Steel wheels - SOLD
Posted: Sat Dec 30, 2006 8:08 pm
by Ralph
Clearing out the shed and now have 4 steel wheels 15x5.1/2" for sale.
The 2 silver wheels are part no 911 361 022 11 and are ET42
The 2 red wheels are part no 944 362 041 00 and are ET53
Anyone want them for £80 ?
Posted: Sat Dec 30, 2006 9:00 pm
by Four
Ron,
I've sent you a PM.
Doug
Posted: Sat Dec 30, 2006 9:08 pm
by Ralph
Doug, will call you tomorrow.
Posted: Sun Dec 31, 2006 4:05 pm
by hunter
Hi Ron
Sent you pm
Darran
Posted: Mon Jan 01, 2007 5:22 pm
by Ralph
Darran,
No PM received ?
Posted: Tue Jan 02, 2007 10:51 am
by louis356
what does the ET numbers mean?
I assume that 2 are 911 wheels and 2 are 944 wheels are both sets the same?
Posted: Tue Jan 02, 2007 10:58 am
by Lightweight_911
ET is the offset of the wheel - see the image below for explanation:
Posted: Wed Jan 03, 2007 11:44 am
by Ralph
Thanks Andy, the above picture is worth saving for reference when looking for suitable wheels.
Us Europeans work mainly with ET, but the Americans work mainly with backspace.
Posted: Thu Jan 04, 2007 2:09 pm
by louis356
What offest should I be looking at for my 912?
I've got some steel wheels (5.5) but just to make sure that they fit.
1980's vintage if I recall (will have to have a look - but where?)
Posted: Thu Jan 04, 2007 9:18 pm
by Ralph
Louis,
I think that you should be looking for the ET42 911 wheels.
The ET should be stamped into the wheel, on the ones I have just sold it was stamped into the face between the wheel nuts.
i think
Posted: Mon Jan 08, 2007 10:20 pm
by pantswagen
the 911 and 944 use a similar but different front ub
-in fact i know they do, althought they use the same disc
-the 911 hub is farther out board
-the 944 farteher in board
spindles maybe similar
ie a 944 steel space saver may rub a 911/2 front arch
Posted: Tue Jan 09, 2007 1:43 pm
by louis356
Ihave 53 marked on mine
Darn, does that mean they are too big?
Posted: Tue Jan 09, 2007 1:45 pm
by louis356
Or would they be OK for the back and I get some 42 for the front?
THEN i JUST HAVE TO FIND 2
Posted: Tue Jan 09, 2007 8:35 pm
by elliot
I may be able to help, I've got 2 or 3 of these wheels in my garage roof space that I was getting ready to ebay. They are 5.5 x 15 not sure of the ET though, I'll check tomorrow if you're interested.
Brian.
Posted: Wed Jan 10, 2007 9:08 am
by louis356
Yes please!