Re-chroming

[Steven]

Can anyone recommend any one for re-chroming. I've got some pitted bits of chrome on my car, they're solid enough and replacements aren't that cheap. Or is it better to bite the bullet and buy new bits?

A northern location would be helpful.

Steven

[Helen]

never used them myself but picked a leaflet up at the NEC classic car show

Derby Plating tel:01332 382408

or

Chrome-Plating by S&T Yate nr Bristol Tel:01454 313162 who seem to be related to the Derby plating as they recommned them themselves ?

[Evil J Guano]

I have used London and Brighton Plating http://www.lbplating.com/ not near you but very good.

Remember the results are dependant on the polishing, and as with any polishing it's knowing when to stop so you retain any edges etc. Also a few parts like Horn Grilles are made of alloy called mayzac (sp) which is very difficult to get plated. Another thing to consider is how shiny your new stuff is going to look next to the old, so if you are getting things that are 'paired' then I would get them both done.

G

[jtparr]

hi steven

I have used

Central Engineering Design
Unit 1
Riverside Industrial Estate
West Hythe road
West Hythe
Hythe
01303 266505

recently for all my chrome plating and passive yellow zinc coatings

very good

also they are able to re-chrome the cast mayzac type items too, they did the catch levers within my door handles and they came out gorgeous


ask for Ken



Jonathan

[hot66]

there is a really good place near Barnsley .... I think its called prestige plating. Well recommended

[Barry]

Whatever chrome you get done make sure you get the triple process.

Office chairs, pram handles and the like are (I believe) straight chrome-on-steel. This is fine until it gets damp, and then it starts to rust.

The triple process is a coating of copper, then nickel, and finally chrome. This is why when you polish through good chrome it looks 'copper'ery' underneath.

Certainly the West Hyth crowd triple chrome, not cheap though:the TR rear bumper blade, four overriders and two tiny number plate lights were around £350 -£400 . Good job the front bumper blade was O.K.

[stuby]

there is a really good place near Barnsley .... I think its called prestige plating. Well recommended

Yep - can vouch for Brian @ Prestige Plating, a Jaguar fan through and through - know them well (family run setup - very friendly)
have had all mine done there to date and no real problems
They also do a fine job on polishing alloys !!! Did my deep 6s, very reasonably priced

[58A - 71E]

Steven, I had all my stuff for the 356 done by Brian at
Prestige Electro Plating
Unit 9 Station Road Industrial Estate Valley Road
Wombwell
Barnsley
S73 0BS
South Yorkshire
Tel: 01226 751389

Cost about £500 but had a few bits off the 911 done at the same time, did a good job, but the process is totally dependent upon the quality of the metal once they've stripped off the old stuff.

Also used a company called Midas Touch in Castleford (01977 604040) who does gold plating, chroming, nickel, zinc, alloy polishing, powder coating sand and vapour blasting - only used him for shot blasting and powder coating so far but really good quality and cheap as chips...! (perfect for us northerners )
James

[Alan @ CanfordClassics]

Hi,

In case it helps chroming will be something I hope to offer as a service in the near future. Here are few pics of parts I have just had done. James is also perfectly correct, in that the results are only as good as the quality of the original.

Thanks

Alan

Chrome SWB quarter window frame and parts


Chrome SWB door frames


Various SWB and LWB parts, some of which are just polished, such as 2 sets of sunroof parts, dash trim and LWB door top and rear side window trim. This which will be anodised as per original.

[912uk]

looks nice stuff Alan.. I am about to use Rainbow polishing for my 356 stuff just boxing it all up now, as he can get all sorts of stuff done. Very reasonable prices esp on polishing wheels.

[Steven]

Thanks for all the responses. Some useful contacts, cheers!

Steven