Page 1 of 1
Body sealer
Posted: Fri Nov 17, 2006 6:55 pm
by wizzman
Hello all,
Could anyone help me and advise on the best product to use for the inside surface of the front luggage compartment ? It's called spray sealer and I believe a special applicator gun is required for the 3m. I'm half sure that somebody recommended a Wurth variety.
Any product part numbers would be appreciated
Thanks
Wizzman
Posted: Fri Nov 17, 2006 11:19 pm
by 1972_911t
The wurth gun and sealer is NLA in the UK, the 3m product is a very close alternative.
See this thread
http://www.ddk-online.com/phpBB2/viewto ... sc&start=0
Steve
Posted: Fri Nov 17, 2006 11:21 pm
by 1972_911t
If you are only doing a small area and dont want to buy a bulk load of sealer to get the gun free I have an almost new one I may be willing to sell. There 160 + vat new but if you buy a few cases of sealer you get one free.
Steve
Posted: Sat Nov 18, 2006 10:42 am
by 2.4TE
Just checked my receipt from Wurth for my purchase of the gun etc in Jan 2004:
Wurth Tel. 08705 987841
Grey sprayable sealant 310 mls no. 0893228 (£7.00)
Air Applicator gun no. 18916280 (£105.51)
Prices exclude VAT.
You can really get through the cannisters of sealant, even for a small job!
HTH
Posted: Sun Nov 19, 2006 1:50 pm
by Alan @ CanfordClassics
I will be doing this job in the next few days and will get some pics.
Alan
Posted: Mon Nov 20, 2006 3:57 pm
by wizzman
Alan.UK wrote:I will be doing this job in the next few days and will get some pics.
Alan
Look forward to seeing the pics Alan and thanks for the response
Ian
Posted: Mon Nov 20, 2006 4:05 pm
by wizzman
1972_911t wrote:If you are only doing a small area and dont want to buy a bulk load of sealer to get the gun free I have an almost new one I may be willing to sell. There 160 + vat new but if you buy a few cases of sealer you get one free.
Seve
Thanks Steve , Is the gun a 3 m or wurth item and what will you take for it at this financially difficult time of year ?
Remember , Christmas is a time for giving !!!
Cheers. Ian
Posted: Mon Nov 20, 2006 4:09 pm
by wizzman
2.4TE wrote:Just checked my receipt from Wurth for my purchase of the gun etc in Jan 2004:
Wurth Tel. 08705 987841
Grey sprayable sealant 310 mls no. 0893228 (£7.00)
Air Applicator gun no. 18916280 (£105.51)
Prices exclude VAT.
You can really get through the cannisters of sealant, even for a small job!
HTH
Mot helpfull , Thanks for the response
Ian
Posted: Wed Nov 22, 2006 9:29 am
by 1972_911t
I would want £80 for the gun. It was new about 4 weeks ago and has only been used to do my fuel tank as the body shop is doing the rest of the sealing. Its the 3m gun which im told is identical to the wurth gun which is NLA.
Steve
Posted: Thu Nov 23, 2006 2:09 pm
by wizzman
1972_911t wrote:I would want £80 for the gun. It was new about 4 weeks ago and has only been used to do my fuel tank as the body shop is doing the rest of the sealing. Its the 3m gun which im told is identical to the wurth gun which is NLA.
Steve
Sounds good to me,Steve, do you want to give me a call and give me your details and I'll send you the dosh sharpish.Will send my number and address on a pm
Thanks
Ian
Posted: Thu Nov 23, 2006 3:40 pm
by Alan @ CanfordClassics
Hi,
Most of the spray sealer is now done. Fuel tank, all inner wings, front tank support and outter slam panel, inside the trunk around the tank support and the engine bay.
Will have used 17-19 tubes.
Alan
After a few test I got the texture very original looking
Thanks
Alan
PS. Thanks Nick for borrowing the wurth gun