Page 1 of 1
Crankshaft
Posted: Sun Nov 05, 2006 7:40 pm
by 210bhp
A friend of mine is looking for a reasonable crankshaft for an engine rebuild. It is for a 2.4E engine but my understanding is a crank from any 2.4 or 2.7 engine will be the same. Thanks for your help.
Regards
Mike
Posted: Mon Nov 06, 2006 8:25 am
by Simon Rudge
Hi Mike,
I have a crank, I think it is a 2.7 but will check. I thnk it is sound but will need a grind(who goes this far on an engine build and doesn't do this bit!)
I will come back to you over the next few days when I have had a chance to have a look at it.
Regards
2.4 crank
Posted: Tue Nov 07, 2006 5:14 pm
by butzsi
Mike, I also have a crank that needs a regrind.
Chris
Posted: Thu Nov 09, 2006 2:51 pm
by Mike911scrs
HI Mike I have a STD/STD 2.4/2.7 crank if you are still looking.
regards mike
Posted: Sat Nov 18, 2006 10:02 pm
by Simon Rudge
Mike,
I have had a look at the crank, unfortunately it is a 2.0/2.2 crank I think. The mains and big ends are the same size, which makes it an early one I believe.
Sorry not to be able to help.
Any good for anyone else outthere?
Posted: Sat Nov 18, 2006 10:19 pm
by 210bhp
Simon
Many thanks for your time and trouble looking for a suitable crank.
The good news is I think we are sorted.
Thanks once again
Regards
Mike
Posted: Sun Nov 19, 2006 8:28 pm
by Simon Rudge
Mike,
Glad you are sorted, following my reply last night, another buyer popped so a result for all three!
All the best,