Crankshaft

210bhp · Post by **210bhp** » Sun Nov 05, 2006 7:40 pm

A friend of mine is looking for a reasonable crankshaft for an engine rebuild. It is for a 2.4E engine but my understanding is a crank from any 2.4 or 2.7 engine will be the same. Thanks for your help.
Regards
Mike

Simon Rudge · Post by **Simon Rudge** » Mon Nov 06, 2006 8:25 am

Hi Mike,

I have a crank, I think it is a 2.7 but will check. I thnk it is sound but will need a grind(who goes this far on an engine build and doesn't do this bit!)

I will come back to you over the next few days when I have had a chance to have a look at it.

Regards

butzsi · Post by **butzsi** » Tue Nov 07, 2006 5:14 pm

Mike, I also have a crank that needs a regrind.

Chris

MBEngineering · Post by **MBEngineering** » Thu Nov 09, 2006 2:51 pm

HI Mike I have a STD/STD 2.4/2.7 crank if you are still looking.

regards mike

Simon Rudge · Post by **Simon Rudge** » Sat Nov 18, 2006 10:02 pm

Mike,

I have had a look at the crank, unfortunately it is a 2.0/2.2 crank I think. The mains and big ends are the same size, which makes it an early one I believe.

Sorry not to be able to help.

Any good for anyone else outthere?

210bhp · Post by **210bhp** » Sat Nov 18, 2006 10:19 pm

Simon
Many thanks for your time and trouble looking for a suitable crank.
The good news is I think we are sorted.
Thanks once again
Regards
Mike

Simon Rudge · Post by **Simon Rudge** » Sun Nov 19, 2006 8:28 pm

Mike,

Glad you are sorted, following my reply last night, another buyer popped so a result for all three!

All the best,

DDK - Die Deutschen Klassiker

Crankshaft

Crankshaft

2.4 crank