Page 1 of 1
Tachometer
Posted: Tue Mar 02, 2004 5:42 am
by saxon
I have a problem with my tachometer when i start the engine the needle goes all the way round to eight thousand revs and stays there, is this easy
to sort out, any help would be appreciated.
Posted: Tue Mar 02, 2004 6:06 am
by 912uk
hmmm sounds an odd one that. It must be the Taco as the cable can only rotate at a set speed ie of the engine. Sounds like you might have to find another see if you can borrow one to test it
Mark
gosh it's early I still need more sleep. Off to Weybridge now.
Posted: Tue Mar 02, 2004 8:41 am
by FraserMurray
is it maybe a loose wire? My oil temp guage started playing up - permanently at max temp, turned out one of the wires from the temp sender had come loose, may be wort having a look at the connections.
F
Posted: Tue Mar 02, 2004 9:07 am
by Luke
my tacho bounced constantly, it turned out to be a combination of a bad connection on one wire and incorrect points gap and timing. If there's no obvoiusly corroded wire/connector, it's worth taking a look at the points.
Posted: Wed Mar 03, 2004 4:26 am
by saxon
Thanks for all the information guys.