Page 1 of 1
12v tacho for 356
Posted: Sat Oct 14, 2006 4:49 pm
by greg356
Hi, does anybody have a 12v tach for my 356? Recently but a type 1 engine in which does not use the orginal mechanical drive tach of the 356.

Posted: Sat Oct 14, 2006 5:08 pm
by Lightweight_911
I would contact some of the Speedster replica manufacturers - their repro tachos should be just what you need.
Posted: Sun Oct 15, 2006 3:25 pm
by greg356
Thanks for the info, I will give them a try. I guess I was hoping someone had an orginal or advice on how to modify another tach.

Posted: Sun Oct 15, 2006 5:05 pm
by Lightweight_911
As far as I remember, the only 356 to use an electric tacho was the 356 B/C Carrera & those gauges go for a lot of money these days.
An early 912 tacho (with green figures & chrome bezel) would be similar to your other 356 instruments but they're larger in diameter & would mean that you had to make the hole in your dash bigger to get it to fit.
Posted: Mon Oct 16, 2006 9:42 am
by Rustbucket
I got a large 912 one, took the guts out of it and put in in the hollow shell of the old cable 356.........I scanned in the artwork off the old guage and shrunk it to fit the 356 size. the back of the guage looks a little messy but its all there now, if it works

Posted: Mon Oct 16, 2006 7:09 pm
by greg356
Again thanks for the ideas. First stab at a repro hit nearly £400 ouch. Guess I will have to keep looking, unless someone else as some ideas?

Posted: Wed Oct 18, 2006 5:20 am
by Paul @ P R Services
We have Carrera ones.
12volt electronic.
Red line at 6000
Finish at 8000
£275 + VAT but I do need an exchange unit or add another £50
I would also like to say we have them in stock as well but I sold the last one today, so it would take a couple of weeks to get one.
All the best
Paul.
Posted: Wed Oct 18, 2006 7:44 pm
by 912uk
I have a green dial 912 one from a 65 car.. if any good £30 + post