Page 1 of 1
Fuchs
Posted: Sun Feb 29, 2004 9:39 am
by Miggs
anyone got any nuts for fuchs need 16 if not where to buy
Posted: Sun Feb 29, 2004 11:38 am
by Lightweight_911
You can buy 'em new from all the usual outlets or check ebay as there's nearly always a set for sale :
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 2462397390
& you'll need 20 not 16 (unless you're going to fit locking nuts or have 4 already).
Posted: Sun Feb 29, 2004 1:26 pm
by 912uk
doo!!
Posted: Sun Feb 29, 2004 1:30 pm
by Miggs
locking wheel bolts hence the 16
Posted: Sun Feb 29, 2004 1:33 pm
by 912uk
I must admit i will need to get a set of these as well very soon once they have been polished too cold staying in .Work shop needs a heater !!!! brrrr
Posted: Sun Feb 29, 2004 1:41 pm
by Miggs
i have sent mine off to be polished took them there friday get them back on monday and i can tell you that its bloody bloody cheap and super quick service
Posted: Sun Feb 29, 2004 2:10 pm
by 912uk
I thought you were doing your own wheels???
Posted: Sun Feb 29, 2004 3:12 pm
by Miggs
not for this price i aint
Posted: Mon Mar 01, 2004 9:22 pm
by Miggs
are the nuts the same as standard nuts????
Posted: Mon Mar 01, 2004 11:03 pm
by Lightweight_911
Not quite sure what you mean by 'standard' nuts.
If you mean are the lugnuts for Fuchs wheels the same as those for steel wheels the answer is no.
Steel wheels use steel nuts whereas Fuchs usually use alloy lugnuts.
Posted: Tue Mar 02, 2004 7:26 am
by Miggs
Posted: Tue Mar 02, 2004 10:42 am
by RSCarrera
Any pictures of the finished product?