Page 1 of 1
Gripper LSD for 901 box
Posted: Sun Sep 10, 2006 4:03 pm
by pmjt
Posted: Sun Sep 10, 2006 9:30 pm
by 210bhp
Can you pm me a price on this Philip. It is for my swb rally project
Regards
Mike
Posted: Sun Sep 10, 2006 9:42 pm
by Lightweight_911
Common Mike - spill the beans...
"It is for my swb rally project "
"They will be for my new car"
Posted: Sun Sep 10, 2006 9:49 pm
by 210bhp
I'm gonna get those Chunnel guys back for all their 'mint t' leg pulling.
Regards
Mike
Posted: Sun Sep 10, 2006 10:36 pm
by bjmullan
Can I be your navigator or better still the driver!
Posted: Mon Sep 11, 2006 9:34 am
by steve wright
forgive the ignorance - do you need to split the box and can it be fitted insitu?
Posted: Mon Sep 11, 2006 11:33 am
by Alan @ CanfordClassics
It can be fitted in situ, but make sure the pre-load/backlash is measured before removing your diff. I am running a 40% gripper diff and I don't think you will need anymore than that.
Alan
Posted: Tue Sep 12, 2006 7:13 am
by 914-6
Hi,
and ther price is??
Ian
Posted: Sun Sep 24, 2006 3:53 am
by budge96
Is this still available gentlemen ? thanks Bert ,
ecrobinson1726@msn.com
Posted: Sun Sep 24, 2006 9:03 am
by impmad2000
The opinion of several "specialists" at Husborne Crawley is that it is for a Fine spline 915 gearbox - i.e later SC......
Cheers
Tim
Posted: Sun Sep 24, 2006 9:23 am
by pmjt
impmad2000 wrote:The opinion of several "specialists" at Husborne Crawley is that it is for a Fine spline 915 gearbox - i.e later SC......
Thanks for carting it around for me Tim
I'm confused as when I bought it from Jim Avus, it was sold as being for a 901 box?
Perhaps I need to call Jim to clarify....
P
Posted: Sun Sep 24, 2006 5:31 pm
by Bertroex
Aha, so this is for a 915. Cool. Phil, I am interested if and when it can be put on my car. I have a 915/44 gearbox, and a LSD was listed as M220 either 80% or 40% Limited slip differential.
I presume that it is for 40% and knowing Jim Avis' reputation of having raced carrera 3.0 in the olden days, it might be compatible.
I need to make a few quick enquieries but whilst i do this, would you mind pm me of some price indication?
Many thanks in advance,
bert
Still for sale !
Posted: Thu Nov 23, 2006 1:28 pm
by impmad2000
I'm pretty sure this is still for sale.... Please
It's in my garage !
Tim
Posted: Fri Nov 24, 2006 9:23 pm
by Mike911scrs
HI P to fit the diff correctly the gearbox will require stripping and the diff setting , bearing pre-load and backlash and not in situ'. (seen it don' and had to repair it)
regards mike
