Page 1 of 1
Becker Radio
Posted: Tue Jul 04, 2006 1:13 pm
by tanick
I installed a Becker Radio into my car last night. It works but is really faint. I've seen them for sale with amplifiers. Have I bought only half a radio?
Also anyone know what the pin arrangement is for the DIN socket on the back?
Posted: Tue Jul 04, 2006 1:25 pm
by hot66
have you tried turning the knob that says 'volume' clockwise ?
Posted: Tue Jul 04, 2006 2:08 pm
by tanick
I've tried (almost) everything will ALL the knobs.
Posted: Tue Jul 04, 2006 2:15 pm
by Nige
speaker wires connected properly, polarity and all that?
Front to rear fader set right?
Posted: Tue Jul 04, 2006 5:37 pm
by tanick
fader? Its mono
Just wondering why some seem to come with an amp?
Posted: Tue Jul 04, 2006 7:58 pm
by saintcm
I understand they all did in hese times.
My app burned and now my radio ain't working anymore.
So I guess it's the same issue...
Cheers,
Posted: Tue Jul 04, 2006 10:24 pm
by tanick
Fixed it. There's a black plastic plug that goes into the DIN plug on the back. I noticed it had 2 pins in it to short two of the connectors. Don't know what it shorts but it works now. I'll look into it after CLM.