Page 67 of 141
Re: My '72 911T
Posted: Tue Oct 27, 2020 12:22 pm
by bjmullan
Re: My '72 911T
Posted: Tue Oct 27, 2020 5:21 pm
by 911hillclimber
^^^Agree!^^^
Re: My '72 911T
Posted: Tue Oct 27, 2020 5:59 pm
by Gary71
I see that all the time, don’t need it hanging onto the garage wall

Re: My '72 911T
Posted: Tue Oct 27, 2020 10:23 pm
by 911hillclimber
Soon be in paint!

Re: My '72 911T
Posted: Wed Oct 28, 2020 6:30 am
by PeterK
Gary71 wrote:I see that all the time, don’t need it hanging onto the garage wall

But you’ll miss it while Barry is laying on his hands
Sent from my iPhone using Tapatalk
Re: My '72 911T
Posted: Thu Oct 29, 2020 2:23 pm
by deano
Wish I had that space Gary!! Here is mine - car is freshly Barry'd from the front, back to the doors. Luckily, one of the three bonnets that I had collected met his approval. I decided on new OEM wings as one of mine was toast behind the hockey stick shaped support and my attempts to 'fix' it with a hammer and dolly only made it worse

Leading next on both sides of the scuttle panel (around the windscreen) to close the gaps to the new wings... then new kidney bowls and new rear quarter sections in the area removed to get to the bowls... fun, fun!
Re: My '72 911T
Posted: Thu Oct 29, 2020 9:38 pm
by Gary71
Looks good Dean, I do forget sometimes that my garage is a decent size. Spent years in a single fighting and you adapt, but everything is so much harder.
Car is all packed ready to roll for the long tow south tomorrow. Fun getting it in as this trailer may have a roof but it doesn’t have a winch!
I’ll be buying a winch before I try to load it for the return.

Re: My '72 911T
Posted: Thu Oct 29, 2020 10:14 pm
by 911hillclimber
Good to see Gary, best of luck for the run tomorrow.
A Big Garage = a Big Mess to keep clean!
How long before the return trip is needed?
Re: My '72 911T
Posted: Fri Oct 30, 2020 7:27 pm
by Gary71
6.5 hours drive later....
Gently does it, up she goes:
And she’s on (and screen jigs in)
Verdict is it’s pretty much straight, needs a gentle tug across the back (2mm) other than that it bolted straight on.
Barry is happy with it, no horrors found, not bent as a banana!
A great relief
Beer in hand now at the hotel and a long drive back tomorrow ready to tidy the garage!
Re: My '72 911T
Posted: Fri Oct 30, 2020 7:33 pm
by Bootsy
Re: My '72 911T
Posted: Fri Oct 30, 2020 8:26 pm
by hashman
Thats great news Gary. Another big relief.
Now that you have space in your garage, why don't i bring my 911 to park there so you can keep your skills up to
scratch.
Karl
Re: My '72 911T
Posted: Fri Oct 30, 2020 8:30 pm
by Gary71

Seems like it’s next occupant will be my mates 944 for a bottom end rebuild.
I’ve tried to tell him that knocking noise isn’t normal

Re: My '72 911T
Posted: Fri Oct 30, 2020 8:32 pm
by Gary71
hashman wrote:Thats great news Gary. Another big relief.
Now that you have space in your garage, why don't i bring my 911 to park there so you can keep your skills up to
scratch.
Karl
It’s weird but doing another one would be so simple, you’d jump straight to the right way to do it rather than cocking about with ‘easier’ options.
You can see why after 47 911s Barry has the hang of it...
Re: My '72 911T
Posted: Fri Oct 30, 2020 9:04 pm
by bjmullan
I can see a new career for you Gary
BTW fantastic news about the condition of your chassis.
Re: My '72 911T
Posted: Fri Oct 30, 2020 9:31 pm
by rhd racer
Excellent news Gary.
I get all my trailer bits from Trailertek, and have always found them really reliable. Good to see you got th3 hang of the trailer reversing bit!