70T rolling resto / right date

PMNorris · Post by **PMNorris** » Fri May 22, 2020 9:44 am

I dropped it off at OSC for a hornoscopy and painting on Wednesday. It should be ready just after the bank holiday.

PMNorris · Post by **PMNorris** » Fri May 29, 2020 4:03 pm

Just picked it up. I think it looks great.

The RSR style horns suit the exhaust much better than the original shape

Dougieboy1 · Post by **Dougieboy1** » Fri May 29, 2020 4:52 pm

silver isnt usually my thing but that looks really really nice. like the side decals a lot

911hillclimber · Post by **911hillclimber** » Fri May 29, 2020 7:33 pm

Are the wheels 6 & 8's?

Darren65 · Post by **Darren65** » Fri May 29, 2020 11:31 pm

Congrats

hot66 · Post by **hot66** » Sat May 30, 2020 9:24 am

Bet it sounds epic with that exhaust

PMNorris · Post by **PMNorris** » Mon Jun 01, 2020 7:33 am

911hillclimber wrote:Are the wheels 6 & 8's?

The wheels are original 7R's at the front and 8's at the rear. They were refurbished by Art wheels near Strasbourg in France around 18 months ago,

PMNorris · Post by **PMNorris** » Mon Jun 01, 2020 8:33 am

hot66 wrote:Bet it sounds epic with that exhaust

It sounds awesome. It howls. I have no soundproofing either. Not sure how enjoyable it will be on a long journey.

PMNorris · Post by **PMNorris** » Sun Nov 22, 2020 5:19 pm

Got myself a list of winter projects to do....
https://youtu.be/XeYI1oyQxTw

And fixed the issue of my windscreen wipers that were not parking and no intermittent. I also fixed my horn.
https://youtu.be/ZiYcRqoffDw

911SE · Post by **911SE** » Wed Nov 25, 2020 7:24 pm

Good to see you keep busy Paul

PMNorris · Post by **PMNorris** » Thu Dec 31, 2020 10:48 am

H1 Refurb:

My original H1's were pretty tired looking....

The bowls and reflectors were corroded

Rather than restoring all the parts, I bought replacements rims, reflectors and seals

The rims came with the very long bolts and all rubber grommets already attached.

The reflectors are very good quality. A significant improvement.

I sanded down and repainted the bowl

I cleaned up the crusty original springs and fitted a few other replacement parts

Job done. Now they are adjusted and the lenses have been cleaned they are excellent lights. Much better than the H4's that the previous owner had fitted.

PMNorris · Post by **PMNorris** » Thu Dec 31, 2020 10:55 am

My Dials have now been removed. I dropped them off with Julian Reap earlier this week (all socially distanced and masked appropriately of course).

None of them are in a terrible state, but they all need modifications, particularly the speedo following my move from Switzerland to the UK, to put a new MPH dial face on.

911hillclimber · Post by **911hillclimber** » Thu Dec 31, 2020 11:21 am

I've used Julian twice with perfect cost and on time.
Does your clock work?
I had contemplated Julian to repair mine that sometimes works for a few minutes then stops for months. Electrics to the clock are ok, the clock is suspect.

Not sure if he is a clock restorer AND repair capable?

PMNorris · Post by **PMNorris** » Thu Dec 31, 2020 2:05 pm

911hillclimber wrote:I've used Julian twice with perfect cost and on time.
Does your clock work?
I had contemplated Julian to repair mine that sometimes works for a few minutes then stops for months. Electrics to the clock are ok, the clock is suspect.

Not sure if he is a clock restorer AND repair capable?

Hi,
My clock does work, it just runs slow, so he will adjust it. He did have the new mechanical bits for a clock that he was putting in for someone else.

Paul

911hillclimber · Post by **911hillclimber** » Thu Dec 31, 2020 3:36 pm

Good to know, thank you.

DDK - Die Deutschen Klassiker

70T rolling resto / right date

Re: 70T rolling resto / right date

Re: 70T rolling resto / right date

Re: 70T rolling resto / right date

Re: 70T rolling resto / right date

Re: 70T rolling resto / right date

Re: 70T rolling resto / right date

Re: 70T rolling resto / right date

Re: 70T rolling resto / right date

Re: 70T rolling resto / right date

Re: 70T rolling resto / right date

Re: 70T rolling resto / right date

Re: 70T rolling resto / right date

Re: 70T rolling resto / right date

Re: 70T rolling resto / right date

Re: 70T rolling resto / right date