Re: What did you do in/on/for your Porsche today?
Posted: Fri Oct 20, 2023 11:43 am
Have you got a photo of the other side ( drive side) of the fan ?
Pic of the other side:
Might be more interesting!
DDK - Die Deutschen Klassiker
The 'Maverick' Classic Porsche Forum and Classic Porsche Club for Porsche 356, Aircooled Porsche 911, Porsche 912, Porsche 914 & Porsche Replicas. 'We join for the cars but stay for the people'
https://www.ddk-online.com/phpBB2/
What did you do in/on/for your Porsche today?
Page 518 of 620
Re: What did you do in/on/for your Porsche today?
Posted: Fri Oct 20, 2023 11:53 am
Not sure if the fan is more efficient, but it does work 'just' about holding the engine temperature. All ok for the 50 seconds or less the engine run on WOT!
Pic of the other side:
Might be more interesting!
Pic of the other side:
Might be more interesting!
Re: What did you do in/on/for your Porsche today?
Posted: Fri Oct 20, 2023 12:20 pm
Did you engineer this yourself? All very interesting!
Re: What did you do in/on/for your Porsche today?
Posted: Fri Oct 20, 2023 1:50 pm
No, not my handy work.
Designed (ledgend says) by 3 Porsche chaps in a pub! Jonathan on here know the full story, but Iirc Bob Garretson, Crispin Manners and one other ( the machinist) who I can't recall his name.
Only Crispin alive now possibly.
This was about 20 years ago. Jonathan may notice this post and correct me.
It was the main reason I bought the engine many years ago for the Lola, the engine choice was a Rover V8 or this one.
So pleased to have this unique engine even though I think it must swallow a lot of BHP to run it!
Designed (ledgend says) by 3 Porsche chaps in a pub! Jonathan on here know the full story, but Iirc Bob Garretson, Crispin Manners and one other ( the machinist) who I can't recall his name.
Only Crispin alive now possibly.
This was about 20 years ago. Jonathan may notice this post and correct me.
It was the main reason I bought the engine many years ago for the Lola, the engine choice was a Rover V8 or this one.
So pleased to have this unique engine even though I think it must swallow a lot of BHP to run it!
Re: What did you do in/on/for your Porsche today?
Posted: Fri Oct 20, 2023 2:40 pm
.
Bob Garretson's still alive (as far as I know) ...
.
Bob Garretson's still alive (as far as I know) ...
.
Re: What did you do in/on/for your Porsche today?
Posted: Fri Oct 20, 2023 4:31 pm
Ah..Maybe I'm thinking of Bruce Anderson?
Engine now all done (!)
Head stud torques all even and down to correct torque, none loose. Cam carrier bolts that I could reach all ok too.
All plugs the same colour and all leads etc nice and clean.
Parts on order to button it up.
When I did this engine and the time before I used M8 Dowty seals on the lower rocker cover bolts (this engine has bolts, not studs) and plain gaskets, all oil tight, so fresh Dowty seals ordered.
The chassis is next, but no Porsche content so will not bother anyone!
Hope to have it all back together by end of next week.
What a long time ago this was, measure an awful lot, cut once.
[url=https://postimg.cc/G9qMjtMP]
Engine now all done (!)
Head stud torques all even and down to correct torque, none loose. Cam carrier bolts that I could reach all ok too.
All plugs the same colour and all leads etc nice and clean.
Parts on order to button it up.
When I did this engine and the time before I used M8 Dowty seals on the lower rocker cover bolts (this engine has bolts, not studs) and plain gaskets, all oil tight, so fresh Dowty seals ordered.
The chassis is next, but no Porsche content so will not bother anyone!
Hope to have it all back together by end of next week.
What a long time ago this was, measure an awful lot, cut once.
[url=https://postimg.cc/G9qMjtMP]
Re: What did you do in/on/for your Porsche today?
Posted: Thu Oct 26, 2023 5:19 am
It's always a pleasure to delve into the history and engineering details of these remarkable Porsche engines. The story of how the engine design is said to have originated over a discussion among Porsche enthusiasts in a pub adds a touch of legend to the whole experience. With the passing of time, it's impressive that some of the original creators like Bob Garretson and possibly Crispin Manners are still around to witness the enduring legacy of their work.
Your meticulous work on the engine is a testament to the dedication that Porsche enthusiasts have in preserving the performance and heritage of these iconic cars. The engine's intricate details, from the head stud torques to the careful inspection of plugs and leads, highlight the craftsmanship and precision that goes into maintaining these vehicles.
It's also worth noting your choice of using M8 Dowty seals on the lower rocker cover bolts and plain gaskets to maintain oil tightness. This shows your keen attention to detail in ensuring the engine runs flawlessly. The Porsche community greatly benefits from the knowledge and experience shared in forums like this, where enthusiasts can learn from each other.
The timeline of this project, from measuring to cutting, is a testament to the patience and care required for such endeavors. Best of luck with getting your engine back together, and we look forward to hearing more about your progress.
Your meticulous work on the engine is a testament to the dedication that Porsche enthusiasts have in preserving the performance and heritage of these iconic cars. The engine's intricate details, from the head stud torques to the careful inspection of plugs and leads, highlight the craftsmanship and precision that goes into maintaining these vehicles.
It's also worth noting your choice of using M8 Dowty seals on the lower rocker cover bolts and plain gaskets to maintain oil tightness. This shows your keen attention to detail in ensuring the engine runs flawlessly. The Porsche community greatly benefits from the knowledge and experience shared in forums like this, where enthusiasts can learn from each other.
The timeline of this project, from measuring to cutting, is a testament to the patience and care required for such endeavors. Best of luck with getting your engine back together, and we look forward to hearing more about your progress.
Re: What did you do in/on/for your Porsche today?
Posted: Thu Oct 26, 2023 8:34 am
Hmm.
I wonder what the likely timeline is from when the machines first started writing waffly comments on old Porsche forums to full sentience and inevitable human extinction.
I wonder what the likely timeline is from when the machines first started writing waffly comments on old Porsche forums to full sentience and inevitable human extinction.
Re: What did you do in/on/for your Porsche today?
Posted: Thu Oct 26, 2023 8:55 am
Thanks for the kind words Tim.
The engine was purchased (almost) from Terry Davidson who was Chair of the PCGB way back and 'commissioned' this engine from the 3 'pub designers'.
The engine and 915 box went into his sports race car, a super rare NOMAD which originally had a BRM engine, then a Ford V6 when Terry got the chassis. The car was sold without the Porsche engine to be re-united with the BRM engine/box.
That was a long time ago now, around 2008.
Terry sometimes comes to the hillclimbs we do and goes starry-eyed when he sees the engine again.
You have to keep on top of these cars, hence the details, and there is always means to improve things such as a the Dowty seals.
Engine all buttoned-up and going back into the car this rainy Thursday. I hope to get the who drive train done today but we will see.
Back in action I hope in April next year!
The engine was purchased (almost) from Terry Davidson who was Chair of the PCGB way back and 'commissioned' this engine from the 3 'pub designers'.
The engine and 915 box went into his sports race car, a super rare NOMAD which originally had a BRM engine, then a Ford V6 when Terry got the chassis. The car was sold without the Porsche engine to be re-united with the BRM engine/box.
That was a long time ago now, around 2008.
Terry sometimes comes to the hillclimbs we do and goes starry-eyed when he sees the engine again.
You have to keep on top of these cars, hence the details, and there is always means to improve things such as a the Dowty seals.
Engine all buttoned-up and going back into the car this rainy Thursday. I hope to get the who drive train done today but we will see.
Back in action I hope in April next year!
Re: What did you do in/on/for your Porsche today?
Posted: Thu Oct 26, 2023 9:04 am
Re: What did you do in/on/for your Porsche today?
Posted: Thu Oct 26, 2023 9:21 am
Exactly the same thing struck me, is that an actual person or a rogue AI bot that's taken an overly keen interest in our sub-culture. Or maybe just a combination.....which admittedly would be a relief because we have a few more years..........
Re: What did you do in/on/for your Porsche today?
Posted: Thu Oct 26, 2023 9:34 am
Hi Tim and welcome to DDK. Where are you based and are you planning to attend any DDK meets in-person?timothynevious wrote: ↑Thu Oct 26, 2023 5:19 am It's always a pleasure to delve into the history and engineering details of these remarkable Porsche engines. The story of how the engine design is said to have originated over a discussion among Porsche enthusiasts in a pub adds a touch of legend to the whole experience. With the passing of time, it's impressive that some of the original creators like Bob Garretson and possibly Crispin Manners are still around to witness the enduring legacy of their work.
Your meticulous work on the engine is a testament to the dedication that Porsche enthusiasts have in preserving the performance and heritage of these iconic cars. The engine's intricate details, from the head stud torques to the careful inspection of plugs and leads, highlight the craftsmanship and precision that goes into maintaining these vehicles.
It's also worth noting your choice of using M8 Dowty seals on the lower rocker cover bolts and plain gaskets to maintain oil tightness. This shows your keen attention to detail in ensuring the engine runs flawlessly. The Porsche community greatly benefits from the knowledge and experience shared in forums like this, where enthusiasts can learn from each other.
The timeline of this project, from measuring to cutting, is a testament to the patience and care required for such endeavors. Best of luck with getting your engine back together, and we look forward to hearing more about your progress.
Re: What did you do in/on/for your Porsche today?
Posted: Thu Oct 26, 2023 2:06 pm
Quick! Be nice to them - maybe they’ll choose who to spare based on which forums are most friendly.
Re: What did you do in/on/for your Porsche today?
Posted: Thu Oct 26, 2023 2:49 pm
Re: What did you do in/on/for your Porsche today?
Posted: Thu Oct 26, 2023 3:21 pm
I’ll give Timothy one chance to prove he’s a human being rather than an AI posting berk - if he doesn’t then a f*ck off notice will be served