Page 6 of 9
Re: Porsche 912 "Lucy"
Posted: Thu Sep 25, 2014 10:09 pm
by Bez1
Abend all.
Update. Been a busy Bee......
Dayjob for VW. Proud to have introduced Porsche aftermarket items this year.
Door sill section has been repaired
Heater silencers removed
A quick brush
And a lick of paint
Blasted and zinc spray coated
Installed
Ready to weld
V section door pillar offered up this evening. Hope to weld tomorrow
Thanks for looking
Matt
Re: Porsche 912 "Lucy"
Posted: Fri Sep 26, 2014 6:33 am
by Gary71
Starting to come together! :
Re: Porsche 912 "Lucy"
Posted: Fri Sep 26, 2014 7:37 am
by sladey
Brings back memories!
Nice work!
Re: Porsche 912 "Lucy"
Posted: Fri Sep 26, 2014 3:36 pm
by KS
Lovely work!
Re: Porsche 912 "Lucy"
Posted: Fri Sep 26, 2014 8:41 pm
by Max911
Very interesting! Which material is contained in the internal muffler?
Sorry if definition is not correct, I mean this
If I'm not wrong I will do the same refurbishment...new spare parts cost 165€ each...
Re: Porsche 912 "Lucy"
Posted: Mon Sep 29, 2014 8:28 pm
by Bez1
Max911 wrote:Very interesting! Which material is contained in the internal muffler?
Sorry if definition is not correct, I mean this
If I'm not wrong I will do the same refurbishment...new spare parts cost 165€ each...
Hi Max911
Yes indeed they are eye wateringly expensive and I did consider some new ones, but after some discussion with my father in law we both felt the originals were savable with a bit of TLC. I was expecting a birds nest but was pleasantly surprised by what I found. The packing is very similar to rock wool insulation material. I simply cleaned the 40+ year old glue away and used a modern selant that remains flexible when cured. See the images below.
I'd also bet that the newer parts are of a lower quality than the new ones....
Cheers
Matt
Re: Porsche 912 "Lucy"
Posted: Mon Sep 29, 2014 8:59 pm
by Max911
Great! Thank you Matt!
I hope mine are in similar condition in order to save money and re-use them. i think that most of all is important not to have old oil smell inside cabine!
Re: Porsche 912 "Lucy"
Posted: Thu Oct 16, 2014 6:24 pm
by Bez1
Guten Abend zusammen,
A combination of illness and a broken camera have kept me from updates for the last couple of weeks. However some progress has been made. Been a nice change to do some sub assembly work.
Pedals. Before and after
Could not resist K nuts and brand new ball joints for the various throttle linkages
Door hinge area has been sorted
Bottom of the hinge V section will be welded over the weekend
Danke und einen schönen Abend
Matt
Re: Porsche 912 "Lucy"
Posted: Fri Oct 24, 2014 6:29 pm
by Bez1
Re: Porsche 912 "Lucy"
Posted: Mon Oct 27, 2014 7:31 pm
by Bez1
A quick question for everyone. I am fitting Koni adjustable dampers to Lucy. Has anyone tips and tricks as regards the settings. Was going to start in the middle of the damping range and work from there. Any advice would be very welcome as at the moment they are easy to set up.....
Re: Porsche 912 "Lucy", but I susect
Posted: Mon Oct 27, 2014 8:46 pm
by haasad
My car weighs in a 930 kg, I also have koni open bath adjustable dampers in front. They are set to the middle range but that must depend on the tb diameter . I suspect best is to start soft and raise the setting to suit your style of driving. Its easy to drop the damper rod from the top mount and adjust on the car.
Andy
Re: Porsche 912 "Lucy"
Posted: Wed Oct 29, 2014 9:09 pm
by Bez1
Thanks for the tips Andy. Will be starting in the middle setting and working from there.
Had good day on the chassis and am now very pleased with the panel gaps. We are now at 4mm in every area and the whole sill was moved forward by 2mm to accomplish.
Also made great progress with the wheel arch repair and just waiting on the ok from the paint dude who is on holiday at the moment.
Front cross member is finished. Very pleased with the overall result and will be even better once Schutzed.
Reckon were about half way through the chassis work.
Onwards!
Re: Porsche 912 "Lucy"
Posted: Mon Jan 05, 2015 9:33 pm
by Bez1
Evening all.
A while since my last update. Have been quiet due to the low temps here in Germany. However some progress has been made....
Suspension is ready:
Driveshafts:
Sill is mounted complete with home made front mount. Was a challenge but am very happy with the look. Have the sign off from the bodywork dude.
Plan is to start again in March with the body work and to hopefully have Lucy ready for transport to the blasters and hence paint by the end of 2015.......could be my famous last words.
Thanks for looking
Matt
Re: Porsche 912 "Lucy"
Posted: Wed Feb 11, 2015 6:47 pm
by Bez1
Hi everyone.
Were on with the Spaghetti.........
Very slightly melted from someones welding without removing the fuel or wiring lines, otherwise the loom looks good.
The wires have all been checked and the insulation replaced. My ultimate aim is to "dry" run the loom on the bench before re-fitting.
Fuse holders before and after
I was missing the fuse box covers. The complete Porsche OE fuses boxes are over 90 € + TAX in Germany. However Deutz tractor covers are the same and bought a set for 24 € I intend to re-sell the Deutz holders as they are not 100% the ame as the Porsche holders. In the following image. Porsche TOP: Deutz BOTTOM.
Cover fits 100% though and is as OE Porsche
Rear lights have been refurbished. New chrome paint inside for the reflection. New rubbers, screws and lenses.
Wish the spring would hurry up...........
Thanks for looking
Matt
Re: Porsche 912 "Lucy"
Posted: Tue Apr 07, 2015 8:26 pm
by Bez1
and were back in the room......
Sill is welded and the drivers kidney seam sealed.
Pleased with the fit with the home made corner section
Next on the list is the door slam panel and being a Dansk part I am wondering about the quality and tooling again. The wheel arch panel is a bit off and I am wondering if an OE Porsche panel may be worth the expense. Will be contacting Porsche Kassel who have been great so far with other bits and bobs.
Compared to the other side that I am using as a reference, the first image of said section seems a bit off. Anyone with experience here? Thinking cap time at the moment....
In other news, picked up a good engine cover/lid on Ebay Deutschland
More on the weekend as spring is here.........
Thanks for looking
Matt