DDK - Die Deutschen Klassiker

Neil - Rose Passion have the base seal for Durant mirrors listed separately:

http://www.rosepassion.com/en/cat/porsc ... pad/P14326

Actually, Roger Bray also has it listed - albeit at more than 2x the price ...

thanks Andy I have some bits coming from them RB anyway

I have had numerous items back from Derby Plating which were all 'scabby' mazak - the door furniture especally from a Mk1 Cooper S - and they have come back as new - so it can be done...quite expensive mind,

neilbardsley wrote:MT

I'm guessing these are the plastic ones that you already have?

http://www.rosepassion.com/en/cat/porsc ... left/P1280

Yes that's them. Price has gone up since it seems!

Mick

Here's the first trunk pin guide - this is an unused 914 item from 914rubber. Will it fit? not sure and i havent got a 912 to try it on any more but might be worth a go.



I'll try and hunt out the mazak one for the front that i might have tomorrow

Nice gansey... very autumnal.

Mike.

Thanks Mike. Cable knit to follow

Sorry Neil - I only managed to find a couple of 'female' bonnet/engine lid latch parts ...

Lightweight_911 wrote:Sorry Neil - I only managed to find a couple of 'female' bonnet/engine lid latch parts ...

thanks for looking Andy

Mr Pharmacist wrote:Here's the first trunk pin guide - this is an unused 914 item from 914rubber. Will it fit? not sure and i havent got a 912 to try it on any more but might be worth a go.



I'll try and hunt out the mazak one for the front that i might have tomorrow

Thank you. MT what do you think?

PS I've found this on ebay. I wonder how long it will take to get here from the US?


http://www.ebay.com/itm/PORSCHE-911-912 ... 1793756%26

I've found this one too. Unfortunately delivery between 27 Sep & 3 Oct

http://www.ebay.co.uk/itm/Original-Pors ... 2fbd7#shId

I can't decide if the 914 will be ok since the 914 is taper but as Stuart says I think it's worth a try.

914



912

Here's the other one i have - its another 914 rear - still attached to all the gubbins as the nuts are welded in place.

the 911 / 912 latch i have hasnt got the spring / pin attached to it unfortunately

Morning Neil,

The 914 version is certainly different, but it might be worth a try. And have the platers come back yet?

Don't go buying anything from the US just yet - I need to try a few other sources first. I'm sure I have another front latch somewhere in that safe place!

Be in touch

Mick