Home Built Hot Rod (Full video build)
Moderator: Bootsy
-
Home Built By Jeff
- DDK above all
- Posts: 176
- Joined: Tue Jul 12, 2016 7:49 am
- Location: Sydney, Australia
- Contact:
Re: Home Built Hot Rod (Full video build)
This week I have been busy making my own carpet kit for the car. I had a go at making the removable sound deadening/carpet pieces but, well here is the vid that will show you how it all went.
https://www.youtube.com/watch?v=aSo0cbJBxfk
https://www.youtube.com/watch?v=aSo0cbJBxfk
-
Home Built By Jeff
- DDK above all
- Posts: 176
- Joined: Tue Jul 12, 2016 7:49 am
- Location: Sydney, Australia
- Contact:
Re: Home Built Hot Rod (Full video build)
After a bit of time away from the 911, this week I got stuck back in and made some door trims. You can now see my colour selection for the interior.
https://www.youtube.com/watch?v=XNLMl0ATVQw
https://www.youtube.com/watch?v=XNLMl0ATVQw
-
Home Built By Jeff
- DDK above all
- Posts: 176
- Joined: Tue Jul 12, 2016 7:49 am
- Location: Sydney, Australia
- Contact:
Re: Home Built Hot Rod (Full video build)
This week I continued trimming the rear panels in the car. I needed to make a recesses in the side panels to clear the roll cage. This trimming is very time consuming but I am really enjoying it.
https://www.youtube.com/watch?v=djHqLimx7rs
https://www.youtube.com/watch?v=djHqLimx7rs
-
murph2309
- Put a fork in me, I'm done!
- Posts: 1563
- Joined: Tue Apr 24, 2007 8:38 pm
- Location: London
Re: Home Built Hot Rod (Full video build)
Loud and proud. Love it.
1971 2.2 S Targa viewtopic.php?f=28&t=37364
1978 3.0 SC Coupe
1970 VW Type 2 viewtopic.php?f=43&t=62339&p
1978 3.0 SC Coupe
1970 VW Type 2 viewtopic.php?f=43&t=62339&p
-
Home Built By Jeff
- DDK above all
- Posts: 176
- Joined: Tue Jul 12, 2016 7:49 am
- Location: Sydney, Australia
- Contact:
Re: Home Built Hot Rod (Full video build)
Sorry for the late video. Everything worked against me this week, and I got a lot less done than I hoped. I at least got a start on trimming the seats, so hopefully next week I will be able to finish it off.
https://www.youtube.com/watch?v=3CtNmgmV7QM
https://www.youtube.com/watch?v=3CtNmgmV7QM
-
DustyM
- I need to get out more!
- Posts: 3198
- Joined: Tue Apr 21, 2009 4:12 pm
- Location: Middle England
Re: Home Built Hot Rod (Full video build)
Jeff,
How long does it take you to put the videos together, just curious.
Cheers
Jon
How long does it take you to put the videos together, just curious.
Cheers
Jon
-
Home Built By Jeff
- DDK above all
- Posts: 176
- Joined: Tue Jul 12, 2016 7:49 am
- Location: Sydney, Australia
- Contact:
Re: Home Built Hot Rod (Full video build)
I usually film 2 days of work. I have gotten the editing down to about 3 hours now. The editing is really the more difficult bit, to keep it entertaining, and not get too bogged down in detail. I edit with Final Cut Pro X and I spent a lot of time learning the program and the short cuts. Now I have made over 50 videos it is finally getting a bit easier 
-
DustyM
- I need to get out more!
- Posts: 3198
- Joined: Tue Apr 21, 2009 4:12 pm
- Location: Middle England
Re: Home Built Hot Rod (Full video build)
Is it a GoPro you are filming with or something more sophisticated. I'd love to do some videos in my workshop but there aren't enough hours in the day as it is!
-
Home Built By Jeff
- DDK above all
- Posts: 176
- Joined: Tue Jul 12, 2016 7:49 am
- Location: Sydney, Australia
- Contact:
Re: Home Built Hot Rod (Full video build)
I started the first few videos with the gopro, and I still use it if I am doing anything messy where I don't want to damage my good cameras. Since then I have upgraded few times. I now have lighting, and better microphones. I am on my third camera now which is a Canon 70D with a Rode Microphone. One thing that Casey Neistat says which always rings true though. It doesn't matter how good your gear is, it is all about the story. People will watch the grainiest, scratchiest thing if it is entertaining.
-
Home Built By Jeff
- DDK above all
- Posts: 176
- Joined: Tue Jul 12, 2016 7:49 am
- Location: Sydney, Australia
- Contact:
Re: Home Built Hot Rod (Full video build)
This week I have been tweaking and refining the leather to fit the seat properly and I have finally gotten the outcome I was after.
https://www.youtube.com/watch?v=b-F0oYCx9M8
https://www.youtube.com/watch?v=b-F0oYCx9M8
-
Home Built By Jeff
- DDK above all
- Posts: 176
- Joined: Tue Jul 12, 2016 7:49 am
- Location: Sydney, Australia
- Contact:
-
Home Built By Jeff
- DDK above all
- Posts: 176
- Joined: Tue Jul 12, 2016 7:49 am
- Location: Sydney, Australia
- Contact:
Re: Home Built Hot Rod (Full video build)
This week I have done lots of little things in the interior that needed to be done. I have now managed to get the roll cage back in and it is really coming together.
https://www.youtube.com/watch?v=BbjPajc4cdA
https://www.youtube.com/watch?v=BbjPajc4cdA
-
Home Built By Jeff
- DDK above all
- Posts: 176
- Joined: Tue Jul 12, 2016 7:49 am
- Location: Sydney, Australia
- Contact:
Re: Home Built Hot Rod (Full video build)
This week I have been tidying up the door trims and making my own version of RS door pulls. The biggest challenge was the smallest bits. Making the trim bezels for around the pulls.
https://www.youtube.com/watch?v=8syijrAFPEs
https://www.youtube.com/watch?v=8syijrAFPEs
-
911hillclimber
- Nurse, I think I need some assistance
- Posts: 20690
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: Home Built Hot Rod (Full video build)
Always impressive how you unhesitatingly turn your hand to any aspect of this car.
Great record of events!
Great record of events!
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
Home Built By Jeff
- DDK above all
- Posts: 176
- Joined: Tue Jul 12, 2016 7:49 am
- Location: Sydney, Australia
- Contact:
Re: Home Built Hot Rod (Full video build)
Thanks Hillclimber.
This week I start to re-trim the second seat and then get stuck into the custom dash pieces. All of these little things really seem to take up a lot of time.
https://www.youtube.com/watch?v=mzjy9JxKs2k
This week I start to re-trim the second seat and then get stuck into the custom dash pieces. All of these little things really seem to take up a lot of time.
https://www.youtube.com/watch?v=mzjy9JxKs2k


