70 S, RHD, Signal Orange, UK->Australia->UK

Dougieboy1 · Post by **Dougieboy1** » Fri Apr 20, 2018 1:24 pm

just out of interest, what diameter torsion bars and ARB bars did they recommend front and rear?

Nice looking bits of kit. Am sticking with my original Konis which i got rebuilt to original specification.

Tp81 · Post by **Tp81** » Fri Apr 20, 2018 10:47 pm

I will watch with interest, looks good.

inaglasshouse · Post by **inaglasshouse** » Sat Apr 21, 2018 11:22 pm

The wiring is coming along. Instrument trial fitting and testing (with tank senders etc) today.
I recommend child labour for this sort of thing. Small hands. Tip: there's no need to actually buy a child (running costs are very high). Just borrow one from your local orphanage or similar.

inaglasshouse · Post by **inaglasshouse** » Thu May 24, 2018 5:45 pm

I'm a bit of a sucker for those pics where the shiny new / refurbished parts are laid out on the floor, ready to fit. Like a giant Tamiya instruction manual.
So I think I shall do a few...

All my suspension bits are now back from refurb (hence the thoughts of such photos).

Slow, but plodding along fine at the moment.

jtparr · Post by **jtparr** » Thu May 24, 2018 11:58 pm

Love it.....

911hillclimber · Post by **911hillclimber** » Fri May 25, 2018 10:18 am

Those pre-assembly pics are great, reminds me of how I didn't do mine!
You all have far more patience than me.

BILLY BEAN · Post by **BILLY BEAN** » Fri May 25, 2018 11:30 am

911hillclimber wrote:Those pre-assembly pics are great, reminds me of how I didn't do mine!
You all have far more patience than me.

No patience required. Child labour involved and a stick.

inaglasshouse · Post by **inaglasshouse** » Sat May 26, 2018 7:25 am

Occasionally a carrot, Kirk. If they are very well behaved.

inaglasshouse · Post by **inaglasshouse** » Sat May 26, 2018 7:41 am

Also this week, I finally got around to choosing an engine builder. So into a van went the engine and gearbox.

This is completely shite project management on my part - the oily bits could obviously have been done ages ago and be waiting to just bolt in. But having chatted with the usual suspects and their customers, plus some left-field choices, I had failed to find an engine builder I was completely happy with.
Actually that's not quite true, a couple of options were plausible, but the pricing was quite far detached from reality. I know parts are expensive, but a standard engine rebuild does not cost 25K GBP, whichever way I calculate it.

Another bit of planning incompetence meant I had to load the engine into the van on my own. Heath Robinson (see trolley jack at rear of van), and I very nearly dropped it, but phew, all OK in the end.

Incidentally I love Transit vans. The 4th year of my university course included a bunch of short projects in industry. They let us loose in a fleet of Transit minibuses. End of the year highlight was a little Euro tour, including Turin - quite sporting on the alpine passes...

Lightweight_911 · Post by **Lightweight_911** » Sat May 26, 2018 8:59 am

inaglasshouse wrote:... but a standard engine rebuild does not cost 25K GBP, whichever way I calculate it.

Glad to hear someone else who also thinks that this is taking the p*ss ...

.

Gary71 · Post by **Gary71** » Sat May 26, 2018 9:22 am

Lightweight_911 wrote:
inaglasshouse wrote:... but a standard engine rebuild does not cost 25K GBP, whichever way I calculate it.
Glad to hear someone else who also thinks that this is taking the p*ss ...

.

Porsche tax...

Or even worse “Classic Porsche tax”.

tangerineT · Post by **tangerineT** » Sat May 26, 2018 10:01 am

Gary71 wrote:
Lightweight_911 wrote:
inaglasshouse wrote:... but a standard engine rebuild does not cost 25K GBP, whichever way I calculate it.
Glad to hear someone else who also thinks that this is taking the p*ss ...

.

Porsche tax...

Or even worse “Classic Porsche tax”.

I was quoted around that figure too ( over 25k) ,, then another 11k to do the gearbox .............plus vodka and tonic

Obviously I declined so the dealer in question added 45 minutes to my bill to load the engine etc back in my van

When questioned about the extra 45 mins he replied that it was calculated at 4x men working 11 minutes each to help me load it up ......two of those men being my friend paul ,,,and oh yeah ..me

BILLY BEAN · Post by **BILLY BEAN** » Sat May 26, 2018 10:03 am

inaglasshouse wrote:Occasionally a carrot, Kirk. If they are very well behaved.

Richard, buying carrots you are going over budget and you are spoiling the little blighters.

BILLY BEAN · Post by **BILLY BEAN** » Sat May 26, 2018 10:22 am

I fully understand the high cost of restoring a shell and all of the hundreds of parts that are finally attached to said shell. There are many hours involved in cleaning, blasting, painting, powder coating, plating etc. However, I have been unable to get my head around some of the engine rebuild costs that are quoted.

inaglasshouse · Post by **inaglasshouse** » Sat May 26, 2018 11:31 am

tangerineT wrote:When questioned about the extra 45 mins he replied that it was calculated at 4x men working 11 minutes each to help me load it up ......two of those men being my friend paul ,,,and oh yeah ..me

Classy.

DDK - Die Deutschen Klassiker

70 S, RHD, Signal Orange, UK->Australia->UK

Re: 70 S, RHD, Signal Orange, UK->Australia->UK

Re: 70 S, RHD, Signal Orange, UK->Australia->UK

Re: 70 S, RHD, Signal Orange, UK->Australia->UK

Re: 70 S, RHD, Signal Orange, UK->Australia->UK

Re: 70 S, RHD, Signal Orange, UK->Australia->UK

Re: 70 S, RHD, Signal Orange, UK->Australia->UK

Re: 70 S, RHD, Signal Orange, UK->Australia->UK

Re: 70 S, RHD, Signal Orange, UK->Australia->UK

Re: 70 S, RHD, Signal Orange, UK->Australia->UK

Re: 70 S, RHD, Signal Orange, UK->Australia->UK

70 S, RHD, Signal Orange, UK->Australia->UK

Re: 70 S, RHD, Signal Orange, UK->Australia->UK

Re: 70 S, RHD, Signal Orange, UK->Australia->UK

Re: 70 S, RHD, Signal Orange, UK->Australia->UK

Re: 70 S, RHD, Signal Orange, UK->Australia->UK