Page 4 of 6

Re: Offer to Stamp Paint Tags

Posted: Thu Nov 12, 2020 5:53 pm
by 210bhp
You should have received my tag by now. Donation made to the charity. You are doing a great job. Thanks.

Regards
Mike

Re: Offer to Stamp Paint Tags

Posted: Thu Nov 12, 2020 6:46 pm
by Bootsy
Thanks for the donation

Re: Offer to Stamp Paint Tags

Posted: Fri Nov 13, 2020 10:37 pm
by Ralph
Thanks John - received the nicely stamped tag back today and donation made.

Cheers,

Ralph.

Re: Offer to Stamp Paint Tags

Posted: Sat Nov 14, 2020 9:25 am
by johnM
Ralph wrote:Thanks John - received the nicely stamped tag back today and donation made.

Cheers,

Ralph.
Thanks for the feed back Ralph. Really happy your pleased with it.

And thanks for the kind donation.

Re: Offer to Stamp Paint Tags

Posted: Mon Nov 16, 2020 1:28 pm
by Ralph
Now I need to fit my nice new tag.

I have the correct hammer drive rivets but they look a little fiddly.

Anyone have any hot tips or tricks to help installation?

Thanks.

Re: Offer to Stamp Paint Tags

Posted: Mon Nov 16, 2020 1:40 pm
by johnM
Ralph wrote:Now I need to fit my nice new tag.

I have the correct hammer drive rivets but they look a little fiddly.

Anyone have any hot tips or tricks to help installation?

Thanks.
Yep, glue the rivets in, and use double sided tape on the tag!!

Re: Offer to Stamp Paint Tags

Posted: Mon Nov 16, 2020 2:22 pm
by johnM
Hi Mike

That’s yours completed. Hope it’s to your satisfaction.

Image


Sent from my iPhone using Tapatalk

Re: Offer to Stamp Paint Tags

Posted: Mon Nov 16, 2020 2:44 pm
by inaglasshouse
johnM wrote:
Ralph wrote:Now I need to fit my nice new tag.

I have the correct hammer drive rivets but they look a little fiddly.

Anyone have any hot tips or tricks to help installation?

Thanks.
Yep, glue the rivets in, and use double sided tape on the tag!!
Cheating!
I used blu-tack to hold the rivet onto the end of an old 3/8 drive Allen key, then lined it up (carefully) and bashed the socket end of said key. A more sophisticated version would probably use a flat-tipped punch, but I didn't have one of those to hand.
Anyway easier than bashing the rivet direct - space to swing a hammer is rather restricted in the door post area even with the door fully open.

Re: Offer to Stamp Paint Tags

Posted: Mon Nov 16, 2020 4:39 pm
by Ralph
I've just realised that a small concave nail punch would do the trick - may even hold the drive rivet with a little of Richard's Blu tack.

Re: Offer to Stamp Paint Tags

Posted: Mon Nov 16, 2020 4:56 pm
by Gary71
Received mine today. Thanks John :)

Re: Offer to Stamp Paint Tags

Posted: Mon Nov 16, 2020 6:44 pm
by 210bhp
That looks just great John. Many thanks. Donation already made. Appreciate your help on this.

Regards
Mike

Re: Offer to Stamp Paint Tags

Posted: Mon Nov 16, 2020 6:56 pm
by johnM
Well think that’s all the tags stamped and sent.

Thanks so much for all the kind donations. I think that’s around £200 donated. Hopefully a great result for everyone 8)

Re: Offer to Stamp Paint Tags

Posted: Mon Nov 16, 2020 7:18 pm
by inaglasshouse
johnM wrote:Well think that’s all the tags stamped and sent.

Thanks so much for all the kind donations. I think that’s around £200 donated. Hopefully a great result for everyone 8)
Nice one John :cheers:

Re: Offer to Stamp Paint Tags

Posted: Tue Nov 17, 2020 7:59 pm
by Darren65
Gary71 wrote:Not always, there’s a deeply anal thread on the 911registry about tags (that Darren contributes heavily to :):)) that shows a few without the hyphen.
....yes sorry about that! :oops:

Re: Offer to Stamp Paint Tags

Posted: Tue Nov 17, 2020 8:00 pm
by Darren65
johnM wrote:Well think that’s all the tags stamped and sent.

Thanks so much for all the kind donations. I think that’s around £200 donated. Hopefully a great result for everyone 8)
Bravo! :cheers: ....

....I do believe I may have been your first! :drunken: