Page 26 of 41

Re: 914 2.0 > 3.0 GT Conversion

Posted: Sun Mar 10, 2019 3:18 pm
by defianty
Years ago a bought a replacement targa top that was in much better condition than the one I got with my car. However like many others it had lost a corner at some point in its life. It was a presentable top but need looking at now.

This is the damaged corner.

Image

After cleaning the area I started to build it up using fibreglass filler.

Image

Before long I had enough filler there to enable me to reshape the corner as it would have originally been.

Image

Re: 914 2.0 > 3.0 GT Conversion

Posted: Sun Mar 10, 2019 3:18 pm
by defianty
On removing the latch hardwear I came across one screw that wouldn't budge and in the end I had to drill out the insert.

Image

Once I had the insert out I could see that it closely resembled a rivnut.

Image

So with some strong two part adhesive I glued in a rivnut in its place.

Image

Re: 914 2.0 > 3.0 GT Conversion

Posted: Sun Mar 10, 2019 3:19 pm
by defianty
I'd seen Raptor Beliner used before to repaint the targa texture and fairly recently U-POL have released it in 2K Aerosol. After finding a couple of rather cheap cans on Ebay I decided to go that route.

Image

With the roof sanded down almost smooth with 80 grit and a few small repairs made and primered I was ready to give it a go.

Two cans later the job was done. To start with the finish was a bit patchy but I was prepared for that I knew it would impove after it had flashed off.

So 24 hours later this it what I had.

Image

Image

And here's that corner repair

Image

Re: 914 2.0 > 3.0 GT Conversion

Posted: Sun Mar 10, 2019 3:21 pm
by defianty
The next day I refitted the original Perlon and refurbished latches I did a few months ago along with new fittings.

Image

Image

Image

Image

Really happy with the result. The texture of the raptor liner is a bit finer than the original finish but it's closer to the finish of the vinyl on the sail panels.

Re: 914 2.0 > 3.0 GT Conversion

Posted: Sun Mar 10, 2019 3:52 pm
by 210bhp
Lovely work Stephen

Regards
Mike

Re: 914 2.0 > 3.0 GT Conversion

Posted: Sun Mar 10, 2019 5:00 pm
by johnM
It really is impressive stuff Stephen.

Re: 914 2.0 > 3.0 GT Conversion

Posted: Sun Mar 10, 2019 5:12 pm
by bjmullan
Lovely, looks like new 8)

Re: 914 2.0 > 3.0 GT Conversion

Posted: Sun Mar 10, 2019 5:54 pm
by Gary71
Really good, that Raptor gave a great finish.

Re: 914 2.0 > 3.0 GT Conversion

Posted: Sun Mar 10, 2019 6:00 pm
by jtparr
:cheers: '

Re: 914 2.0 > 3.0 GT Conversion

Posted: Sun Mar 10, 2019 7:45 pm
by defianty
Thanks guys, pleased to tick another thing off the list.

Re: 914 2.0 > 3.0 GT Conversion

Posted: Sun Mar 10, 2019 9:03 pm
by rhd racer
Fantastic finish Stephen, very impressive

Re: 914 2.0 > 3.0 GT Conversion

Posted: Mon Mar 11, 2019 2:38 pm
by defianty
It's painted! I was speechless when I first saw the car. It truly looks fantastic. At this stage it's just a gun finish but it still looks impressive.

Plan now is not to rush and leave it a couple of weeks for the paint to harden before polishing. All being well I should take delivery of it at the end of the month.


Image

Image

Image

Image

Image

Image

Image

Image


Link to walk around video.

Image

Re: 914 2.0 > 3.0 GT Conversion

Posted: Mon Mar 11, 2019 2:40 pm
by Bootsy
Wonderful!

Re: 914 2.0 > 3.0 GT Conversion

Posted: Mon Mar 11, 2019 3:39 pm
by Lightweight_911
Looks stunning Stephen !

It's going to be a fabulous car when it's finished ... 8)

.

Re: 914 2.0 > 3.0 GT Conversion

Posted: Mon Mar 11, 2019 5:35 pm
by jtparr
Top drawer ..