Nige wrote:At least the doors look good Gary.
Drivers door is at least 20 years newer than the other one and galvanised, so that’s probably cheating!
Moderator: Bootsy
Nige wrote:At least the doors look good Gary.
Thanks, now out. Someone has been there before as it just had normal screws holding it in, so 5 minutes rather than 30!911hillclimber wrote:IIRC the ign switch comes out by removing the bezel 9unscrew, bloody tight) and you have a steel plate with un-screwable security bolts, so a drill-out task.

Ash tray light if I remember correctly. Should be a small bulb in it.Gary71 wrote:
Any ideas what this is? It dropped out from behind the knee bar which I’ve never taken off before.

Gary71 wrote:Cheers Mark, My lad is already helping taking stuff apart, did both doors for me with a little supervision. He’s just really worried about damaging stuff, probably not helped by me saying ‘careful with that it’s irreplaceable’

Ha! So true. I have to have my patience dial set to max when I see him fumbling with the ratchet. It’s all good learning though.Bootsy wrote:
![]()





