914/6 - Texas GT

For all you Porsche 914 fanatics!

Moderators: drummerboytom, MdR

Post Reply
tp_reading
DDK above all
Posts: 153
Joined: Sun May 03, 2015 6:46 pm
Location: Berkshire

Re: 914/6 - Texas GT

Post by tp_reading »

"So the mind is made up: GT arches will be welded on, with 7s and 8s on sticky rubber."


The way to go !
Tony Parker
968 Coupe

In the past;
1 x 914/6 GTR
1 x 987
4 x 968's of various hues
1 x 996
1 x 986
1 x 944
Bewildebeest
DDK slapper chatter
Posts: 392
Joined: Fri Oct 13, 2006 5:33 pm
Location: Northants

Re: 914/6 - Texas GT

Post by Bewildebeest »

23e Heure wrote: GT arches will be welded on,
How ? What's the approved method ? Can you butt weld them or do you use an overlapping joint ?
moggy
DDK rules my life!
Posts: 1225
Joined: Fri Oct 21, 2005 9:06 pm
Location: Mid Wales
Contact:

Re: 914/6 - Texas GT

Post by moggy »

I loved the Kumhos but they only lasted me a year of spirited driving. When I came to needing new ones I went for Yoko Advans and would highly recommend them too. As grippy as the Kumhos but last a lot longer, good on track too and a lot cheaper.

Good reviews here.

http://www.tyrereviews.co.uk/Tyre/Yokoh ... a-AD08.htm £107

http://www.tyrereviews.co.uk/Tyre/Kumho/V70a.htm £163

Prices based on Camskill 225 45 r17
rhd racer
Me and DDK sitting in a tree! KISSING
Posts: 2578
Joined: Wed Jun 23, 2004 9:47 pm
Location: Nottinghamshire

Re: 914/6 - Texas GT

Post by rhd racer »

Well done James, great news.

I have run and do run Kumhos and Toyos on the 14 and the Boxster and have been very pleased - Moggy's note on the wear rate is true of the Kumhos but they are super grippy.

The rules are changing on track focused tyres due to a new EU directive, and the MSA have created a new list 1C. This means that some existing 1B tyres, like those above, will no longer be E marked, and therefore not road legal. I am not fully up to speed with the changes as all my sets are nearly new and e-marked, but I think the changes will hit the market in April or so. Therefore if shelling out £800 per so on tyres, make sure the supplier confirms they are e-marked.

Hope that helps!

Cheers
Wayne
93 964 C2
99 Boxster 2.5 > 3.4 hill climber

71 914/6 3.0 - gone

'You see Paul, hill climbing is like making love to a beautiful woman. You get your motor running, check your fluids, hang on tight and WHOA..30 seconds later it's all over!' Swiss Tony
User avatar
23e Heure
I used to have a life, then came DDK
Posts: 3879
Joined: Thu Dec 09, 2004 3:14 pm
Location: London

Re: 914/6 - Texas GT

Post by 23e Heure »

Bewildebeest wrote:
23e Heure wrote: GT arches will be welded on,
How ? What's the approved method ? Can you butt weld them or do you use an overlapping joint ?
If you like metal work done well, you may enjoy this: http://www.914world.com/bbs2/index.php? ... &p=2256434

That's a link directly to where they start adding the rear flares, but the entire thread is awesome...
James
'20 718 GT4
'87 R4 GTL Clan
'74 914/6 3.0 Texas GT (Sold)
'73 911 2.7 RS Replica LHD (Sold)
'72 911 2.4 E RHD (Sold)
User avatar
23e Heure
I used to have a life, then came DDK
Posts: 3879
Joined: Thu Dec 09, 2004 3:14 pm
Location: London

Re: 914/6 - Texas GT

Post by 23e Heure »

moggy wrote:I loved the Kumhos but they only lasted me a year of spirited driving. When I came to needing new ones I went for Yoko Advans and would highly recommend them too. As grippy as the Kumhos but last a lot longer, good on track too and a lot cheaper.
rhd racer wrote:The rules are changing on track focused tyres due to a new EU directive, and the MSA have created a new list 1C. This means that some existing 1B tyres, like those above, will no longer be E marked, and therefore not road legal...
Thanks fellas, great feedback as always.

Looks like I might try ordering some Advans quick while there is still E marked stock left.

What are those like in the wet though?
James
'20 718 GT4
'87 R4 GTL Clan
'74 914/6 3.0 Texas GT (Sold)
'73 911 2.7 RS Replica LHD (Sold)
'72 911 2.4 E RHD (Sold)
moggy
DDK rules my life!
Posts: 1225
Joined: Fri Oct 21, 2005 9:06 pm
Location: Mid Wales
Contact:

Re: 914/6 - Texas GT

Post by moggy »

Watch this

https://www.youtube.com/watch?v=fbZgogb9KSI

I had the Yoko's on at this very wet track day up at Anglesey last year. The video doesn't do it justice, it was VERY wet. Watch it from 11mins onwards as this was my first session out that day so the first few laps are pretty tip-toe then I got stuck behind a load of M3's for ages that simply wouldn't allow me passed in a gentlemanly manner, so at 11.20 I get a little bit more aggressive and muscle my way past after a little of side-ways action coming out of the start/finish straight corner. Then I start having some fun trying to keep up with a Radical, which then promptly spins out shortly after getting past me. I was going to try to stay with him at 12.42 but thought I'd stay behind the 911 and see how I compared, which I immediately regretted as he was 'driving miss daisy' in the corners, then matching my acceleration in the straights so was a PITA to get past (but no where near as bad as thoser BMW drivers :lol: ). But back to the tyres.... they were very good in the wet and over the course of the day they really gave me confidence to lean on them more and more. I can't remember having the same confidence with the Kumho's in those extreme wet conditions. Notice how I'm able to take more speed around the corners and get the power on earlier compared to the 911 thing (sorry but I'm not a 911 guy and have no idea what model it is). He had Toyos on (Proxes I think - from memory).
rhd racer
Me and DDK sitting in a tree! KISSING
Posts: 2578
Joined: Wed Jun 23, 2004 9:47 pm
Location: Nottinghamshire

Re: 914/6 - Texas GT

Post by rhd racer »

Hi James,

Yoko AO32Rs or Toyo Proxes are both as good as each other in my opinion, though the latter cheaper and with more size options.
I think the former were OE on Lotus Exiges, and with 225/50 x15 and 205/50 X 15 sizes they were perfect for a 7&8 rim combo. Both gave deep slashes so will disburse water.

The Kumho has a more traditional tread pattern but it only comes with about 3 or 4 MM. of depth so does not get rid of much water in standing water. However, in damp conditions I find them better because I run the super soft compound that you can stick your finger nail in - this means they stick like wot sit to a blanket, even in the damp.

On the 914 I have a Yoko / Toyo mix by axle due only to availability issues at the time - I use these for track days or long road trips. I also have a set of Kumhos for sprinting, and these overheat by your 2nd flying lap on a circuit. For hills and normal road use they are awesome.

For the Boxster I went to a set of Toyos, as I wanted a solid all rounder to benchmark performance on the new car. They suit the car well, and based on it's performance on standard suspension I would think the advantage of a Kumho is fairly limited. I may try a set in 2017 when I have modded the suspension and do some back to back tests, but I need another set of rims to do that.

If I were you I would get medium compound Toyo or Yokos in the above sizes, as these will be up to track days and long European tours with sensible wear rates.

Cheers,
Wayne
93 964 C2
99 Boxster 2.5 > 3.4 hill climber

71 914/6 3.0 - gone

'You see Paul, hill climbing is like making love to a beautiful woman. You get your motor running, check your fluids, hang on tight and WHOA..30 seconds later it's all over!' Swiss Tony
User avatar
23e Heure
I used to have a life, then came DDK
Posts: 3879
Joined: Thu Dec 09, 2004 3:14 pm
Location: London

Re: 914/6 - Texas GT

Post by 23e Heure »

And we're off...

Image
James
'20 718 GT4
'87 R4 GTL Clan
'74 914/6 3.0 Texas GT (Sold)
'73 911 2.7 RS Replica LHD (Sold)
'72 911 2.4 E RHD (Sold)
User avatar
KS
Nurse, I think I need some assistance
Posts: 15777
Joined: Fri May 07, 2004 3:12 pm
Location: Cornwall

Re: 914/6 - Texas GT

Post by KS »

:cheers: :bounce: :drunken:
Keith Seume
Follow on Instagram @orange914
My YouTube channel
Darren C
DDK rules my life!
Posts: 1398
Joined: Sat Dec 27, 2014 9:43 am
Location: Chichester UK

Re: 914/6 - Texas GT

Post by Darren C »

SUPERB ! :)
@classiccarguru1
jtparr
DDK 1st, 2nd and 3rd for me!
Posts: 2367
Joined: Mon May 24, 2004 10:54 pm
Location: london/surrey

Re: 914/6 - Texas GT

Post by jtparr »

James....Who are you getting to do your arches...look forward to seeing that
Jonathan
1974 2.7 Carrera
(full restoration. now as an RS Touring)
1963 3.8 E Type
( 11 years in the making…………………….)
1952. XK120…the next one ……….……..)
moggy
DDK rules my life!
Posts: 1225
Joined: Fri Oct 21, 2005 9:06 pm
Location: Mid Wales
Contact:

Re: 914/6 - Texas GT

Post by moggy »

Nice one James. Ready for a 914 road trip around mid Wales whenever you are buddy. :P
Mr Pharmacist
Me and DDK sitting in a tree! KISSING
Posts: 2698
Joined: Wed Oct 17, 2007 6:56 pm
Location: Leeds

Re: 914/6 - Texas GT

Post by Mr Pharmacist »

Excellent news!
Stuart

1970 914 2056cc
1979 924 n/a - RIP
1986 924S
1969 912 Targa - sold
gridgway
Nurse, I think I need some assistance
Posts: 5724
Joined: Tue Sep 02, 2008 10:59 pm

Re: 914/6 - Texas GT

Post by gridgway »

Just hold on there a cotton pickin minute. There are other Porsches apart from 914s that enjoy a welsh blat!
moggy wrote:Nice one James. Ready for a 914 road trip around mid Wales whenever you are buddy. :P
Post Reply