356 A Cabriolet restoration

Ongoing and archived Porsche (and other marques) restoration threads from DDK members

Moderator: Bootsy

Steve Kerti
DDK Fanatic
Posts: 64
Joined: Sun Mar 29, 2015 12:27 pm

Re: 356 A Cabriolet restoration

Post by Steve Kerti »

Image
Lead load for final shape.
Classic Fabrications
Steve Kerti
DDK Fanatic
Posts: 64
Joined: Sun Mar 29, 2015 12:27 pm

Re: 356 A Cabriolet restoration

Post by Steve Kerti »

Image
Classic Fabrications
Steve Kerti
DDK Fanatic
Posts: 64
Joined: Sun Mar 29, 2015 12:27 pm

Re: 356 A Cabriolet restoration

Post by Steve Kerti »

Image
Classic Fabrications
Steve Kerti
DDK Fanatic
Posts: 64
Joined: Sun Mar 29, 2015 12:27 pm

Re: 356 A Cabriolet restoration

Post by Steve Kerti »

Image
The bonnet had folded back over itself and was still badly bucked, had some reinforcing plates just poorly tacked on the inner frame for support. I didn't get many pics of the repair process, but here a few.
Classic Fabrications
Steve Kerti
DDK Fanatic
Posts: 64
Joined: Sun Mar 29, 2015 12:27 pm

Re: 356 A Cabriolet restoration

Post by Steve Kerti »

Image
Classic Fabrications
Steve Kerti
DDK Fanatic
Posts: 64
Joined: Sun Mar 29, 2015 12:27 pm

Re: 356 A Cabriolet restoration

Post by Steve Kerti »

Image
Classic Fabrications
Steve Kerti
DDK Fanatic
Posts: 64
Joined: Sun Mar 29, 2015 12:27 pm

Re: 356 A Cabriolet restoration

Post by Steve Kerti »

Image
The L/H Rear also had a impact, it must have been hit directly on the bumper, as very minor damage to external skin, but creased the inner chassis structure, pushed inwards 25mm and downwards 20mm. The pictures shown are the vehicle upside down on the roll over frame.
Classic Fabrications
Steve Kerti
DDK Fanatic
Posts: 64
Joined: Sun Mar 29, 2015 12:27 pm

Re: 356 A Cabriolet restoration

Post by Steve Kerti »

Image
Classic Fabrications
Steve Kerti
DDK Fanatic
Posts: 64
Joined: Sun Mar 29, 2015 12:27 pm

Re: 356 A Cabriolet restoration

Post by Steve Kerti »

Image
Note the body jack ram is pushed out about 30mm more than previous picture.
Last edited by Steve Kerti on Sat Jul 25, 2015 9:33 pm, edited 1 time in total.
Classic Fabrications
Steve Kerti
DDK Fanatic
Posts: 64
Joined: Sun Mar 29, 2015 12:27 pm

Re: 356 A Cabriolet restoration

Post by Steve Kerti »

Image
Classic Fabrications
Steve Kerti
DDK Fanatic
Posts: 64
Joined: Sun Mar 29, 2015 12:27 pm

Re: 356 A Cabriolet restoration

Post by Steve Kerti »

Image
Back up the right way, every thing all lines up and measurements are to factory standards.
Classic Fabrications
Steve Kerti
DDK Fanatic
Posts: 64
Joined: Sun Mar 29, 2015 12:27 pm

Re: 356 A Cabriolet restoration

Post by Steve Kerti »

Image
Constantly pre-fitting doors and roof frame for alignment / fit / gaps along with our own set measurements.
Classic Fabrications
Steve Kerti
DDK Fanatic
Posts: 64
Joined: Sun Mar 29, 2015 12:27 pm

Re: 356 A Cabriolet restoration

Post by Steve Kerti »

Image
Classic Fabrications
jjeffries
DDK slapper chatter
Posts: 315
Joined: Sat Jan 03, 2015 9:23 pm

Re: 356 A Cabriolet restoration

Post by jjeffries »

Did you create your own Celette substitute? Looks good. John
Steve Kerti
DDK Fanatic
Posts: 64
Joined: Sun Mar 29, 2015 12:27 pm

Re: 356 A Cabriolet restoration

Post by Steve Kerti »

Yes, it's much easier for full restoration if your jig frame turns over, I also have a AutoRobot crash repair jig for heavy damage / repair jobs.
Classic Fabrications
Post Reply