Page 3 of 3

Re: 1967 912 REFRESH

Posted: Tue Jun 17, 2014 9:57 pm
by danny
Recovered the plastic rear scoops.
Thanks to Garry visualfx for the vinyl and words of encouragement.
Have recovered the vertical boards too but a bit concerned about fixing them back to the scoops with staples
as they were originally incase it just breaks up the plastic given the fact that it is 47 years old and maybe brittle.
Any ideas anyone????

Image

Also decided the recover part of the dash top as it had been redone in the past
with the wrong speaker holes detail and had always bugged me.
4mm hollow hole punch, hammer, template from Darryl's excellent '66 912 resto page and a steady hand!

Image
Image
Image

Re: 1967 912 REFRESH

Posted: Tue Jun 17, 2014 10:09 pm
by visualfx
Nice work Danny,

I've used the same template many times from Darryl's thread, I also find that once punched out if you get a black marker pen and pop it through every hole from the back it takes away the white vinyl backing which sometimes shows after punching.

Sad I know but it's all in the detail :wink:

Also I use an air staple to reattach the two pieces above as its not as angry as the hand ones

Garry

Re: 1967 912 REFRESH

Posted: Sun Dec 21, 2014 1:02 pm
by Darren65
How are things progressing Danny?

Re: 1967 912 REFRESH

Posted: Sun Dec 21, 2014 2:34 pm
by danny
Slowly Darren :\
Spare time since my last post has just seemed to evaporate, suddenly the summer was gone and it was December!

On a brighter note i did find a few days this last week and now most of the carpets are fitted,
windscreens are back in, dash is in place and the doors (handles, frames and glass) are on.

Planning on hitting it over the Christmas break and get the rest of panels fitted.
Will then update with some photos ;-)

Meanwhile i'll just leave you with a happy face....
Image

Re: 1967 912 REFRESH

Posted: Tue Jan 06, 2015 8:51 pm
by danny
starting to take shape.....

Image
ImageImage
Image

Re: 1967 912 REFRESH

Posted: Tue Jan 06, 2015 10:28 pm
by Darren65
That's coming along nicely.....

.....looks great 8)

Re: 1967 912 REFRESH

Posted: Wed Jan 07, 2015 12:37 am
by cubist
Lovely colour.

Re: 1967 912 REFRESH

Posted: Wed Jan 07, 2015 9:10 am
by sladey
Yes - very cool colour

Re: 1967 912 REFRESH

Posted: Mon Mar 30, 2015 9:23 pm
by danny
and then it was time to leave the body shop....

Image

first time it has seen a road in about 8 years....

Image

then it was time to head south down the M40 and leave car with Max at Revival Cars for a good mechanical overhaul

Image

Image

Good news is it now has an mot and is coming home for Easter :)

Re: 1967 912 REFRESH

Posted: Mon Mar 30, 2015 9:40 pm
by Bootsy
Bet you can't wait.

Looks superb

Re: 1967 912 REFRESH

Posted: Sun Apr 05, 2015 3:39 pm
by danny
Finally back home and back on the road :)
It was a great feeling to get back behind the wheel and take her out again after so long.
Few bits to finish on the interior, wheels need a good clean up, a few other little bits but it's nearly done for now.

Image

Re: 1967 912 REFRESH

Posted: Sun Apr 05, 2015 4:02 pm
by Lightweight_911
Looks lovely - the colour really suits it ... 8)