Page 18 of 41

Re: 914 2.0 > 3.0 GT Conversion

Posted: Sat Jul 21, 2018 3:53 pm
by jtparr
Great to catch up if only briefly at CLM Stephen

Beautiful work....no such thing as stupid and too long...it’s a passion and the principle of only do something properly is to be admired and applauded... :cheers:

Glad you got those 2 screws lined up symmetrically and on axis for the catches... 8)

All the best
Jonathan

Re: 914 2.0 > 3.0 GT Conversion

Posted: Sun Jul 22, 2018 9:36 pm
by LMR
Stunning work!

Re: 914 2.0 > 3.0 GT Conversion

Posted: Mon Jul 23, 2018 9:28 am
by defianty
jtparr wrote:Great to catch up if only briefly at CLM Stephen
Likewise Jonathan, too briefly. Hopefully there's another opportunity before the next one!

Re: 914 2.0 > 3.0 GT Conversion

Posted: Mon Jul 23, 2018 9:30 am
by defianty
sladey wrote: You’ve seen them. We’ve seen them. That’s enough. Crackin job
I didn't think of it like that, but yes, everyone's seen them now. :lol:

Re: 914 2.0 > 3.0 GT Conversion

Posted: Mon Jul 23, 2018 10:48 pm
by jtparr
Sent you a message Stephen

Re: 914 2.0 > 3.0 GT Conversion

Posted: Tue Aug 21, 2018 9:31 pm
by defianty
The last month has been a bit manic personally and also with bits and pieces on the car. A conversation with fellow DDK'er Simon Rudge a while back led to an introduction to the guy he uses for paint. Cutting a long story short the car leaves here tomorrow to be blasted and then painted! The last few days have been rather frantic finishing off all those little jobs I've put off, because they're just little jobs! :lol:

Simon was also kind enough to lend me his rotisserie, I just needed to make adaptors so suit my car.

Image

Thanks also to LMR and Chief for the information about LMR's rotisserie and photo - they really helped.

Re: 914 2.0 > 3.0 GT Conversion

Posted: Tue Aug 21, 2018 9:31 pm
by defianty
Typically those little jobs took several days and as they were just finishing jobs there was little to photograph so no pics unfortunately.

The only job worth photographing was the modification to sill to allow for oil lines to my front cooler. The cooler I'm using has the input and output on opposite sides so I decided the best option was to run a line down each side of the car. Yeah I agree it's not the norm but once the car is together none of it would be visible anyway and it was a considerably cheaper option for the same outcome.

The bottom of the left A post has the indentations originally going to the charcoal canister as I won't be needing those the space is there for the oil line. The right side however is different and required modification.

Before (I'd already previously done a small patch repair here)
Image

A bit of creative shaping with a scaffold pole :lol:
Image

Almost finished
Image

Re: 914 2.0 > 3.0 GT Conversion

Posted: Tue Aug 21, 2018 9:35 pm
by defianty
So from here I'm hoping the next updates will be from the bodyshop. Exciting times ahead!

Re: 914 2.0 > 3.0 GT Conversion

Posted: Tue Aug 21, 2018 9:35 pm
by Gary71
Good to see it all coming together.
What colour?

Re: 914 2.0 > 3.0 GT Conversion

Posted: Tue Aug 21, 2018 9:57 pm
by defianty
Gary71 wrote:Good to see it all coming together.
What colour?
If I had a pound for every time I've asked myself that question it would probably have covered the paint bill! :lol:

I decided just a few days ago that my indecision was all down to the fact that I have the opportunity to change the colour if I wanted. However when I look back to when I was looking for a 914 I only ever wanted a Light Ivory one, no other colour ticked all the boxes for me. So after months of anguish :lol: Light Ivory it will remain.

Re: 914 2.0 > 3.0 GT Conversion

Posted: Wed Aug 22, 2018 12:42 pm
by sladey
It will look great

Re: 914 2.0 > 3.0 GT Conversion

Posted: Wed Aug 22, 2018 12:45 pm
by Bootsy
sladey wrote:It will look great
It will, can't wait to see it. The work you've done to date is superb

Re: 914 2.0 > 3.0 GT Conversion

Posted: Wed Aug 22, 2018 8:48 pm
by defianty
sladey wrote:It will look great
Thanks Mark, let's hope so!

Bootsy wrote:It will, can't wait to see it. The work you've done to date is superb
Cheers Bootsy.

Re: 914 2.0 > 3.0 GT Conversion

Posted: Wed Aug 22, 2018 8:51 pm
by defianty
Image

And there it goes, the furthest it's travelled in three years.

I'll be checking in with the painter in about ten days time, so I'll report back then.

Re: 914 2.0 > 3.0 GT Conversion

Posted: Wed Aug 22, 2018 10:37 pm
by jtparr
Fantastic....