Page 16 of 16

Re: House of Karmann

Posted: Sat Jun 13, 2026 11:35 am
by greg356a
More creative playing on Chat GBT, this time the interior concept;

ImageInterior concept

Re: House of Karmann

Posted: Sat Jun 13, 2026 1:57 pm
by sladey
greg356a wrote:Really cant wait to join them back together, unfortunately there is a lot of work and time before then.

Work recently subscribed to chat gbt very addictive. This image below is the goal.

Imageoverall design concept

Not a perfect image but gives the idea!
Cool look

Re: House of Karmann

Posted: Sat Jun 13, 2026 6:48 pm
by 911hillclimber
Smashing chassis! Looks good but also strong.
Impressive, all of it!

Re: House of Karmann

Posted: Fri Jun 19, 2026 2:57 pm
by greg356a
Hand Brake modification using standard Karmann Ghia cable with the Porsche calipers, rotors.

This was my solution,

Purchase a modification kit from aircooled specialist which contained an aluminium extension piece and a new profile shape swan neck

ImageUntitled by

The actual cable was approx 10mm short so machined down an M10 bolt with a M6 internal thread for the cable.

[url=https://flic.kr/p/2sjx6pT]Image
Untitled by [url=https://www.flickr.com/photos/149951780@N05/]

With the hand brake down at the lowest position the cable is just long enough to clear the VW h/brake bracket preventing any chance of binding when pulling the handbrake up and releasing.

I believe it's a very simple low cost solution. I seems to work well.

Onto the next task, find someone to make me a wiring harness loom.

Re: House of Karmann

Posted: Fri Jun 19, 2026 6:27 pm
by sladey
That’s a nice looking mechanism

Re: House of Karmann

Posted: Mon Jun 29, 2026 3:46 pm
by greg356a
Mudding :)
The paint shop are progressing with the body, despite the intense heat last week.

ImageUntitled

ImageUntitled

ImageUntitled

ImageUntitled

Electrical harness
I have been exploring the use of a bodylogic controller to give greater options and remove the need for bulky and complex array of Fuses and relays. I have sent my spec off for quotation. They are british designed and made electronics. Also fully IVA compliant. Looks very promising.

Re: House of Karmann

Posted: Mon Jul 20, 2026 1:03 pm
by greg356a
I have split the two front seats down into parts ready for paint. Steel base and steel back will go black. I had to complete some weld repairs on the steel backs as some of the original welds had broken around the head rest support. I am thinking this is normal after 50+ years of abuse.

ImageUntitled

ImageUntitled

The parts below are in Cerakote Blue Titanium. The seat hinges will go the same colour.

ImageUntitled

ImageUntitled

Progress on the body and dash continues.

ImageUntitled

ImageUntitled

ImageUntitled

ImageUntitled

ImageUntitled b

Re: House of Karmann

Posted: Tue Jul 21, 2026 4:54 pm
by sladey
Noice