Page 14 of 17

Re: Home Built Hot Rod (Full video build)

Posted: Wed Jun 24, 2020 11:34 am
by Home Built By Jeff
We are getting very close now. This week I get some help from Mrs Jeff to bleed the brakes and I put the rear end of the car back together.

https://youtu.be/klZix0zNocU

Re: Home Built Hot Rod (Full video build)

Posted: Wed Jun 24, 2020 5:52 pm
by brembo
Great progress Jeff,won't belong till your behind the wheel.
Cut pipes on my car similar to yours,but wish I'd left them a wee bit longer as they make a bit of a mess of the rear end.

[url=https://flic.kr/p/2jeYsuN][img]htt ... .jpg[/img]IMG_0037_zpsnickzxof by brembo26, on Flickr[/url]

Re: Home Built Hot Rod (Full video build)

Posted: Thu Jun 25, 2020 1:51 am
by Home Built By Jeff
brembo wrote:Great progress Jeff,won't belong till your behind the wheel.
Cut pipes on my car similar to yours,but wish I'd left them a wee bit longer as they make a bit of a mess of the rear end.

[url=https://flic.kr/p/2jeYsuN][img]htt ... .jpg[/img]IMG_0037_zpsnickzxof by brembo26, on Flickr[/url]
I can't see the link :( . I was not sure how it would go, but I will definitely be upgrading the exhaust in the not too distant future.

Re: Home Built Hot Rod (Full video build)

Posted: Fri Jul 03, 2020 1:33 pm
by Home Built By Jeff
This week, Harry finally moves under his own power, but not until I change the clutch... a couple of times..

https://youtu.be/t1i_sv58YKo

Re: Home Built Hot Rod (Full video build)

Posted: Fri Jul 03, 2020 3:09 pm
by Gary71
Feel for you! Anyone who DIYs a 911 long enough will have had that sinking feeling over something they've forgotten just as they do the last bolt up and lower it to the ground. Yup. It's coming out again!

Clutch should be fine without modifying anything assuming it's a pretty standard 915 set up? Do you have the helper spring on the pedal box?

They are all heavy and not particularly forgiving, so maybe it's just a case of getting used to it?

Re: Home Built Hot Rod (Full video build)

Posted: Fri Jul 03, 2020 11:19 pm
by Home Built By Jeff
I have put a helper spring on the pedal, and I have now slightly shortened the lower connection on the pedal, but it is something I am going to have sort out still.

Re: Home Built Hot Rod (Full video build)

Posted: Thu Jul 09, 2020 8:47 am
by Home Built By Jeff
Harry is finally moving under its own power and now it is time to get it tuned so it can be driven properly.

https://youtu.be/aF0ugovwgb0

Re: Home Built Hot Rod (Full video build)

Posted: Thu Jul 09, 2020 1:11 pm
by Nine One One
Well done!

Sounds really nice, not long for the road trip now

Re: Home Built Hot Rod (Full video build)

Posted: Fri Jul 10, 2020 2:33 am
by Home Built By Jeff
Thanks mate. Still a bit to do before it hits the road.

Re: Home Built Hot Rod (Full video build)

Posted: Thu Jul 16, 2020 11:40 am
by Home Built By Jeff
After last weeks run on the dyno, the biggest issue left on Harry 911 is the clutch. This week I hopefully sort it out for good.

https://youtu.be/U8sMUklLixA

Re: Home Built Hot Rod (Full video build)

Posted: Fri Jul 17, 2020 12:26 am
by jury
Nice work Jeff ! Your commitment and enthusiasm always amazes and inspires !!

Chris

Re: Home Built Hot Rod (Full video build)

Posted: Fri Jul 17, 2020 8:48 am
by 911hillclimber
Indeed, 4 years of tenacity, other cars and a bit of a fire in places recently...
How you keep smiling and not grimacing beats me.

Re: Home Built Hot Rod (Full video build)

Posted: Fri Jul 17, 2020 11:00 am
by Home Built By Jeff
Haha, thanks guys. It is all part of the fun :)

Re: Home Built Hot Rod (Full video build)

Posted: Wed Jul 22, 2020 9:50 pm
by Home Built By Jeff
This week it is time to sort this clutch out on Harry 911 once and for all, then maybe take it for a quick sneaky drive.

https://youtu.be/x1s9d7lWj34

Re: Home Built Hot Rod (Full video build)

Posted: Thu Jul 30, 2020 10:12 am
by Home Built By Jeff
This week I tackle a bunch of little bits and pieces to finish off Harry, with mixed success.


https://youtu.be/5cYUrEgVLyw