Page 2 of 2
Re: Workshop clearout - All parts can be handed over at swap
Posted: Sat Oct 16, 2021 10:30 am
by AndrewSlater
Andy is spot on ( again ) - my '74 car has a revised loom with a single plug to fit the '006' coil. A lot of people cut them off to allow them to use a '001' coil.
The coil for sale is a '008' with the connectors close together as per the picture.
Re: Workshop clearout - All parts can be handed over at swap
Posted: Sat Oct 23, 2021 8:42 am
by g3ngs2
Hi Andrew,
For the swap meet and if still available would be interested in:
9, 15, 29 and 32.
Will PM you also
Thanks,
Engin
Re: Workshop clearout - All parts can be handed over at swap
Posted: Sun Oct 24, 2021 11:45 am
by Flat 6
Item 25, Southbound carpet set received in great order, thanks Andrew.
Just need a finished shell to rebuild and put it in!
Cheers,
Al.
Re: Workshop clearout - All parts can be handed over at swap
Posted: Sun Oct 24, 2021 4:38 pm
by AndrewSlater
Flat 6 wrote:Item 25, Southbound carpet set received in great order, thanks Andrew.
Just need a finished shell to rebuild and put it in!
Cheers,
Al.
Thanks Al, glad it arrived safely.
Look forward to seeing photos of your finished shell - hope it won't be long.
Regards
Andrew
Re: Workshop clearout some reductions- Available at swapmeet
Posted: Mon Oct 25, 2021 3:26 pm
by 8bit-ash
Could I have second dibs on 29 - light surrounds and 32 - rear 1/4 interior panels incase they fall through.
Thanks
Ash
Re: Workshop clearout some reductions- Available at swapmeet
Posted: Mon Oct 25, 2021 4:13 pm
by AndrewSlater
8bit-ash wrote:Could I have second dibs on 29 - light surrounds and 32 - rear 1/4 interior panels incase they fall through.
Thanks
Ash
Will do Ash, PM me your mobile number in case Engin doesn't take them.
Re: Workshop clearout some reductions- Available at swapmeet
Posted: Thu Oct 28, 2021 2:17 pm
by RobFrost
Hi, Can I please buy:
The right hand door Jamb if Sean doesn't come through with the cash or doesn't need it.
Item 16: Hella lamp(s) if one is left or if buyer doesn't come through for the other one.
Item 32: rear quarter panels if buyer doesn't come through (I have a pair but it looks like yours will accommodate inertia reels, right?
Re: Workshop clearout some reductions- Available at swapmeet
Posted: Thu Oct 28, 2021 3:23 pm
by AndrewSlater
RobFrost wrote:Hi, Can I please buy:
The right hand door Jamb if Sean doesn't come through with the cash or doesn't need it.
Item 16: Hella lamp(s) if one is left or if buyer doesn't come through for the other one.
Item 32: rear quarter panels if buyer doesn't come through (I have a pair but it looks like yours will accommodate inertia reels, right?
Hi Rob,
should Sean not want the door jamb I'll mark you down as second dibs.
I'll reserve the top entry Hella fog lamp for you.
As for the rear quarter panels, you would be 3rd dibs ( that probably translates to 'don't hold your breath' but you never know )
Thanks
Andrew
Re: Workshop clearout some reductions- Available at swapmeet
Posted: Thu Oct 28, 2021 11:48 pm
by RobFrost
AndrewSlater wrote:RobFrost wrote:Hi, Can I please buy:
The right hand door Jamb if Sean doesn't come through with the cash or doesn't need it.
Item 16: Hella lamp(s) if one is left or if buyer doesn't come through for the other one.
Item 32: rear quarter panels if buyer doesn't come through (I have a pair but it looks like yours will accommodate inertia reels, right?
Hi Rob,
should Sean not want the door jamb I'll mark you down as second dibs.
I'll reserve the top entry Hella fog lamp for you.
As for the rear quarter panels, you would be 3rd dibs ( that probably translates to 'don't hold your breath' but you never know )
Thanks
Andrew
Thanks. Bringing cash on the day.
Sent from my SM-G988B using Tapatalk
Re: Workshop clearout some reductions- Available at swapmeet
Posted: Sat Oct 30, 2021 10:06 am
by RobFrost
Hi, 1 and 3 together will give me a couple of small steering wheel options for my 1970 911T, right? As I assume the boss would fit the car, and both the rims fit the boss. If so, can I take those please?
Re: Workshop clearout some reductions- Available at swapmeet
Posted: Sat Oct 30, 2021 10:39 am
by Lightweight_911
.
The 914 hub/boss fitted to s/wheel no.1 won't fit a '65-'73 911 ...
.
Re: Workshop clearout some reductions- Available at swapmeet
Posted: Sat Oct 30, 2021 10:52 am
by AndrewSlater
RobFrost wrote:Hi, 1 and 3 together will give me a couple of small steering wheel options for my 1970 911T, right? As I assume the boss would fit the car, and both the rims fit the boss. If so, can I take those please?
Hi Rob,
I don't think the boss from 1) will fit wheel 3), and also not sure if that boss will fit a 911.
Andy doesn't seem to think so in his post - and don't tell him I said this, but he's rarely wrong.
Items 5) and 1) would work together on your car - you would simply need to reuse your own cancellation ring and chose a new horn push.
Would you like me to reserve them and bring them for you tomorrow to have a look at?
All the best
Andrew
Re: Workshop clearout some reductions- Available at swapmeet
Posted: Sat Oct 30, 2021 11:12 am
by RobFrost
yes, please. I've a hunch 1 will be too small but at that price I've nothing to lose giving it a try
Re: Workshop clearout some reductions- Available at swapmeet
Posted: Sat Oct 30, 2021 11:16 am
by RobFrost
Are bosses available to fit (5) to a 911? As that looks like the size I want tbh. You said you were going to fit it to your 912 - I'm guessing that has same fittings as a 911.