DDK - Die Deutschen Klassiker

Nice test drive just, lots of gearchanges, esp 1st -2nd-3rd-2nd-3rd-2nd etc etc and all is much neater.
Have clean reverse selection and 5th to 3rd and 4th, so overall all is well.
Might be nice to have a weaker sping bias on 3rd/4th, but need to see if you need weaker springs.
iirc some came with the shifter, but goodness knows where they are now.

However, well worth the effort!

Checked on the Rennshift site, and you can change the spring bias readily, so will soften the gate bias from 3/4 across to 1/2 so easing the down shift further, but will keep the 3/4 across to 5/R as it is.
There is a spacer under the soring that will need a touch on the lathe and it's done.

Nice to tweak this lot and get things more useable.