Page 2 of 2
Re: Engine fire
Posted: Fri May 14, 2021 9:07 am
by jonno1
Glad you are ok, and you caught it quickly.
Just changed all the fuel lines in the Alfa and use Millers VSPE
https://www.millersoils.co.uk/products/ ... -one-shot/
Bought a 50 second one of these...not sure it would do the job if it was a major fire but could nip one in the bud if I was quick and I like the ease of use:
https://www.marinesuperstore.com/fire-g ... 20Products
Re: Engine fire
Posted: Fri May 14, 2021 6:41 pm
by PMNorris
Glad nobody was hurt... And the car not being seriously damaged is obviously good too
Re: Engine fire
Posted: Fri May 14, 2021 7:51 pm
by Peter
Just seen this Will. Sorry to hear the news, but hope all is OK and at least no-one hurt.
Re: Engine fire
Posted: Sat May 15, 2021 6:40 pm
by bjmullan
Done that got the t-shirt. My first thought was the guy sitting in the drivers seat, the second was my house, as the car was still in the garage! Can laugh at it now but not a nice thing to happen. Hope it all works out.
Re: Engine fire
Posted: Sat May 15, 2021 7:19 pm
by anglophone1
I run the Millers VDP in all 3 70s Porsches.
Does it work ?
Don't know.
Just makes me feel better - especially as only 95 fuel available in ROI!!!
Re: Engine fire
Posted: Sat May 15, 2021 10:18 pm
by redrobin911
I've fitted blaze cut in all my 911's esp after restoration and the chance of a leaking fuel line or carb. IMO worth investing in, doesn't need a power supply and can be cable tie fitted. check it out.
https://www.youtube.com/watch?v=jr9SBQ_wQZA
Re: Engine fire
Posted: Sat May 15, 2021 10:58 pm
by anglophone1
redrobin911 wrote:I've fitted blaze cut in all my 911's esp after restoration and the chance of a leaking fuel line or carb. IMO worth investing in, doesn't need a power supply and can be cable tie fitted. check it out.
https://www.youtube.com/watch?v=jr9SBQ_wQZA
Very neat and simple Robin and relatively cheap protection- did you fit 2 or 3m version?
Re: Engine fire
Posted: Sun May 16, 2021 10:20 am
by redrobin911
anglophone1 wrote:redrobin911 wrote:I've fitted blaze cut in all my 911's esp after restoration and the chance of a leaking fuel line or carb. IMO worth investing in, doesn't need a power supply and can be cable tie fitted. check it out.
https://www.youtube.com/watch?v=jr9SBQ_wQZA
Very neat and simple Robin and relatively cheap protection- did you fit 2 or 3m version?
I think I fitted a 2m to the 67S. 5 mins to fit and potentially a car saver..... I think the 3m might be too long to fit inside a 911/912 engine bay. Once I get a 1000miles or so on the car I was going to remove it i.e. once happy there are no issues or potential leaks, but i've got used to seeing it in the engine bay so most likely leave it now.
Re: Engine fire
Posted: Sun May 16, 2021 10:27 am
by anglophone1
redrobin911 wrote:anglophone1 wrote:redrobin911 wrote:I've fitted blaze cut in all my 911's esp after restoration and the chance of a leaking fuel line or carb. IMO worth investing in, doesn't need a power supply and can be cable tie fitted. check it out.
https://www.youtube.com/watch?v=jr9SBQ_wQZA
Very neat and simple Robin and relatively cheap protection- did you fit 2 or 3m version?
I think I fitted a 2m to the 67S. 5 mins to fit and potentially a car saver..... I think the 3m might be too long to fit inside a 911/912 engine bay. Once I get a 1000miles or so on the car I was going to remove it i.e. once happy there are no issues or potential leaks, but i've got used to seeing it in the engine bay so most likely leave it now.
Under the lid or around bay?
Re: Engine fire
Posted: Sun May 16, 2021 11:55 am
by redrobin911
I think I fitted a 2m to the 67S. 5 mins to fit and potentially a car saver..... I think the 3m might be too long to fit inside a 911/912 engine bay. Once I get a 1000miles or so on the car I was going to remove it i.e. once happy there are no issues or potential leaks, but i've got used to seeing it in the engine bay so most likely leave it now.[/quote]
Under the lid or around bay?[/quote]
Has to be above the source of potential fire so cable tied to the left engine lid support the across the rear over the fuel lines then over the right carb bank then over the left ones. Cable tied most to the engine lid grille - all far to easy. Will sent you a pic to your phone..
Re: Engine fire
Posted: Sun May 16, 2021 1:51 pm
by majordad
Where did you source it from Robin ?