Posted: Mon Nov 22, 2010 8:10 pm
Nice work on the doors Owen 
Looking good
Looking good
DDK - Die Deutschen Klassiker
The 'Maverick' Classic Porsche Forum and Classic Porsche Club for Porsche 356, Aircooled Porsche 911, Porsche 912, Porsche 914 & Porsche Replicas. 'We join for the cars but stay for the people'
https://www.ddk-online.com/phpBB2/
finally got the 912 in to the garage restoration starts here
Page 10 of 17
Posted: Tue Nov 23, 2010 8:40 am
well peased with it now just have to weld it and do the other thanks owen nw
Posted: Tue Nov 23, 2010 9:03 am
Nice work fella.
Posted: Tue Nov 23, 2010 9:07 am
I admire anyone with the balls to reskin a door! I bottled it and bought a 964 door to replace mine 
It was easier to weld the mirror holes up than to even think about reskinning.
It was easier to weld the mirror holes up than to even think about reskinning.Posted: Tue Nov 23, 2010 9:53 am
i ve done about 20 doors on campers , similar process owen nw
other side
owen nw
other side owen nw
Posted: Tue Nov 23, 2010 2:09 pm
one door reskinned and finished turned out great owen nw
Posted: Tue Nov 23, 2010 2:27 pm
owen nw
2nd door skinned
Posted: Fri Nov 26, 2010 5:45 pm
2 nd door now done abit more work than the other but turned out nice owen nw
[IMG]http://i259.photobucket.com/albums/hh28 ... e537-1.jpg[/IMG
[IMG]http://i259.photobucket.com/albums/hh28 ... e537-1.jpg[/IMG
Posted: Tue Nov 30, 2010 6:22 pm
ds door fitted is perfect , ps one when i was fitting to the frame seemed to be a bit big , fitted it and it was , fiited most of the way around the bottom of the skinn set a bit over the sill so i rcut the botttom of the skin a nd refolded it turned out great , bo th doors on and opening closing lovely , a bit of filling along the bottom where i was dolling thats all owen nw
Posted: Wed Dec 01, 2010 12:29 pm
hers some pics of the doors done owen nw
ds
ds
Posted: Wed Dec 01, 2010 1:45 pm
Owen
I'm enjoying reading your thread
Regards
Ants
I'm enjoying reading your thread
Regards
Ants
Posted: Sat Feb 19, 2011 7:25 pm
finall y back at the 912 , had to modify the ps door skinn it was 2 mm to deep , so i recut it and re folded the lip , after dollying the 2 flanges together i welded a few spot welds to secure , i refitted the door but the front leading edge diddn t fully line up with the wing edge , the ds one fell into place ?????????????, so using the slide hammer i managed to get it to move some and the rest i ve done using filler
Posted: Fri Feb 25, 2011 4:06 pm
Posted: Fri Feb 25, 2011 4:07 pm
Posted: Sat Feb 26, 2011 8:04 pm
base coated and flatted , and an other coat on , owen nw
[IMG]http://i259.photobucket.com/albums/hh28 ... e595-1.jpg[/IMG
[IMG]http://i259.photobucket.com/albums/hh28 ... e595-1.jpg[/IMG
