Page 8 of 17

Posted: Sun Sep 19, 2010 11:32 am
by owen nw
Image
Image
Image
Image

Posted: Sun Sep 19, 2010 11:33 am
by owen nw
Image
Image
Image
Image

Posted: Sat Sep 25, 2010 10:38 am
by owen nw
a bit of dust removal , last bit of filling and priming done owen nw
Image
Image
Image
Image
Image

Posted: Sun Sep 26, 2010 4:14 pm
by owen nw
first build up coat came up very well all repairs turned out great , next is the turn of the van owen nw Image
couple of runs , but it has to be flattened agin for the final coats
Image
Image
Image
Image

Posted: Thu Sep 30, 2010 6:26 pm
by owen nw
bumpers and number plate panel done , well all the filling , 2k primed flatted and base coated , next stone chip the inside of these then paint owen nw
Image
Image
Image
Image
Image

Posted: Fri Oct 01, 2010 6:09 pm
by owen nw

Posted: Mon Oct 04, 2010 6:39 pm
by owen nw
to day it was the turn odf the wings , well one of them the worst one , which is still very good . i cut out the areas of rust cleaned everything back , then done some innner frame repairs first , when the inners were done i painted the insides , letting then dry while i made the repair panels , welded these on and , buffed down , flatten the pain over the wing and skimmed up . owen nw
Image
Image
Image
Image
Image
Image

Posted: Mon Oct 04, 2010 6:43 pm
by owen nw
Image
Image
Image
Image
Image

Posted: Mon Oct 11, 2010 6:09 pm
by owen nw
now have the wing filled and done , until my great dane knocked it over so i had to stopper a few bits and prep the back side of the wing ,. now in red lead , just now to seam seal and stone chip before a colour coat is applied owen nw
Image
Image

Posted: Tue Oct 12, 2010 7:25 pm
by Barry
Well done, Owen: home straight now with the body by the looks of it.

I think it's a great credit to you, especially seeing the conditions in which you're working. It's a lovely stage when you realise that the colour sanding is out of the way, and all of a sudden the bodywork's done.

Best of luck with the last of the paint stages :) .

Posted: Tue Oct 12, 2010 8:01 pm
by owen nw
thanks barry , you have to work with what you ve got , when i have all the other panels done , i will fitt them , and flatt everything down with 600 wet dry , and prep for the final which will be done before xmas , again thank you owen nw

Posted: Wed Oct 20, 2010 6:36 pm
by owen nw
wings in a coat of primer after wing number 2 has ahd its repair , well pleased with the result owen nw
Image
Image
Image
Image

Posted: Sun Oct 24, 2010 4:20 pm
by owen nw
Image
Image
Image
Image
Image

Posted: Sun Oct 24, 2010 4:20 pm
by owen nw
Image
Image
Image
Image
Image

Posted: Wed Oct 27, 2010 11:48 am
by owen nw
might get a couple of reply s to this ?? front wings preped and in build up coat of yellow finished with the proper colour of yellow owen nw
build up coat
Image
Image
Image
with gas blower going well
Image
Image
Image