*Help Part Needed Urgently!*
Moderator: Miggs
*Help Part Needed Urgently!*
Calling all you porsche guru's...
I am building a porsche fan conversion on my 62 split bus and need a top pulley that would fit a 5 blade fan assy...
I presume it is similar to 356 or vw split pulley with shims... not sure...Help...
Has anyone got one spare kicking around that they would part with for cash???
I also need a steel wheel in 5 x 130 stud pattern as a spare.. again if you have one and you no longer need it please let me know...
Cheers
Scott
I am building a porsche fan conversion on my 62 split bus and need a top pulley that would fit a 5 blade fan assy...
I presume it is similar to 356 or vw split pulley with shims... not sure...Help...
Has anyone got one spare kicking around that they would part with for cash???
I also need a steel wheel in 5 x 130 stud pattern as a spare.. again if you have one and you no longer need it please let me know...
Cheers
Scott
Not sure, should the belt rub against the fan and half a pulley?if so then I have the fan part and I need the bit you have.
This is the bit I have:
[img][img]http://i69.photobucket.com/albums/i44/s ... nblade.jpg[/img][/img]
Is your bit all I need plus some shims??
Regards
Scott
This is the bit I have:
[img][img]http://i69.photobucket.com/albums/i44/s ... nblade.jpg[/img][/img]
Is your bit all I need plus some shims??
Regards
Scott
Hi sdog 911,
I've got a 5 blade fan (powdercoated red), shims, and pulley half. Only bit I haven't got is the 'washer' that fits between the alternator shaft nut and pulley half.
Also have an alternator....
pm if interested, and I can send you some photos. Was hoping to sell as a job lot.
regards
Robster
I've got a 5 blade fan (powdercoated red), shims, and pulley half. Only bit I haven't got is the 'washer' that fits between the alternator shaft nut and pulley half.
Also have an alternator....
pm if interested, and I can send you some photos. Was hoping to sell as a job lot.
regards
Robster
-
- Nurse, I think I need some assistance
- Posts: 4206
- Joined: Fri Nov 14, 2003 3:10 pm
- Location: Bournemouth
- Contact:
Hi,
An early pulley will not work on that fan as the number of pully holes is different. I am not sure if the same upgrade is required for a VW but it might be worth upgrading the fan to a 11 blade one. It will run cooler
Here is an early 11 blade one on a 2.4T motor
Alan
An early pulley will not work on that fan as the number of pully holes is different. I am not sure if the same upgrade is required for a VW but it might be worth upgrading the fan to a 11 blade one. It will run cooler
Here is an early 11 blade one on a 2.4T motor
Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
Porsche Restoration & Sales