Heaters on speedster replica

Droog · Post by **Droog** » Sat Jun 10, 2006 3:24 pm

I realy need some advice on this, how do i fit the demisters required for SVA i have the heaters from NFauto. some pics would be appreciated

Cheers

PAul

its one of my last sticking points before SVA hopfully.

Old-Bugga · Post by **Old-Bugga** » Sat Jun 10, 2006 11:08 pm

I've got the same ones. What specifically are you wanting pics of i.e. location, wiring?

Droog · Post by **Droog** » Sun Jun 11, 2006 10:17 am

the location is what i am stuck on, as i see it you have two posibilitys neither seem to work without cutting huge chunks out the car. do they go horizontal from inside the boot if the do will they be powerful enougth to demist as i can't get them close to the vent as that area is venturized (i may have made that word up)

or do they go under the dash pointing up i can get one side (passenger) like this but the drivers side is a sod to do as all the gauges, wires ect get in the way, also the dash that side is a differant shape.

so as you can see any help would be appeciated and i will be eternally greatful

thanks PAul

Old-Bugga · Post by **Old-Bugga** » Tue Jun 13, 2006 9:02 pm

Hi Droog,

Hope these help? My dash is actually from a Legend Speedster, so it may not be that much help. Don't have ANY expectations about these suckers keeping you warm!

Droog · Post by **Droog** » Wed Jun 14, 2006 10:55 am

Thanks for the pics.

Hmmm you are lucky, in the M &W the space under the bonnet is shaped like the original Beetle demisters. also (having had the car on the road a few years ago (long story), I fitted speedster demister vents so i am unable to get them flush to the skuttle as you have done.

i take it yours passed sva, if i can get mine in

as long as the tester can feel hot air come out the vent he'll tick the box, its not a huge screen is it?or a winter car.

Paul