Hi all,
first run of the year. My oul pressure shows 4 bar with ignition on, engine not yet started. After starting the engine, the oil pressure maxes out with an audible click for the first 3 or 4 minutes.
Has anyone on here had something similar?
oil pressure 4 bar without engine running?
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
- cschmueck
- DDK Fanatic
- Posts: 54
- Joined: Mon Dec 08, 2014 10:43 am
- Location: Irthlingborough, Northamptonshire
oil pressure 4 bar without engine running?
911T 1972
MGB 1970
NSU Lambretta 1954
DKW 110 1968
MGB 1970
NSU Lambretta 1954
DKW 110 1968
-
SeanP
- I luv DDK!
- Posts: 856
- Joined: Thu Sep 06, 2012 11:59 pm
- Location: North West Essex
Re: oil pressure 4 bar without engine running?
Check your engine ground strap
Pull the wire off of the sender. What does the gauge do? Short the wire to the engine block. What does the gauge do.
If the engine ground strap is ok then replace the sender
Pull the wire off of the sender. What does the gauge do? Short the wire to the engine block. What does the gauge do.
If the engine ground strap is ok then replace the sender
1966 912
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s

