911 Driveshafts non ABS 6 bolt type

Please add Porsche parts and anything you wish to sell here (no commercial sales)

Moderator: Bootsy

Post Reply
Huds71j
DDK Seasoned Poster
Posts: 20
Joined: Sat Nov 07, 2020 10:46 pm

911 Driveshafts non ABS 6 bolt type

Post by Huds71j »

Pair of rear driveshafts

These are the non ABS, 6 bolt mounting versions

All joints feel free and non of the CV boots are split

£225 plus £20 postage if required
Attachments
driveshaft3.jpg
driveshaft4.jpg
Huds71j
DDK Seasoned Poster
Posts: 20
Joined: Sat Nov 07, 2020 10:46 pm

Re: 911 Driveshafts non ABS 6 bolt type

Post by Huds71j »

As i bought these not 100% sure on what model they were removed from, i 've just had some feedback from someone regarding the model

The part number on the CV joint is 911.332.030.01 - according to a post on Pelican these could be turbo shafts ??
Attachments
CV part number
CV part number
Pelican info
Pelican info
Huds71j
DDK Seasoned Poster
Posts: 20
Joined: Sat Nov 07, 2020 10:46 pm

Re: 911 Driveshafts 69 - 75 longhood

Post by Huds71j »

I've removed the CV joints from one shaft to clarify the dimensions

Shaft length is 475mm
Shaft outer spline diameter 30mm
Shaft centre outer diameter 26mm

These would indicate that the shafts would fit 69 - 75

CV joint outer diameter 108mm
CV joint width 30mm
Part number as per picture
Willchappell1
DDK above all
Posts: 166
Joined: Tue Jul 08, 2014 6:41 pm
Location: Moreton in Marsh

Re: 911 Driveshafts non ABS 6 bolt type

Post by Willchappell1 »

Are these still available? If so would you be open to an offer? Cheers

Will 07584445301
http://www.stuttgart-classica.co.uk for all your custom air cooled needs
Huds71j
DDK Seasoned Poster
Posts: 20
Joined: Sat Nov 07, 2020 10:46 pm

Re: 911 Driveshafts non ABS 6 bolt type

Post by Huds71j »

Hi Will - i've txt you.
Post Reply