911 (65-68) Wossner 81mm piston set for 2.0 engine, new
Moderator: Bootsy
-
- DDK above all
- Posts: 165
- Joined: Mon Apr 07, 2008 5:57 pm
- Location: Finland
911 (65-68) Wossner 81mm piston set for 2.0 engine, new
I have set of new Wossner (Wössner) pistons for 2.0 liter 911 engine, these are non-S versions so comp ratio app. 9.0:1.
These are oversize pistons so you'll need to bore 80mm Birals to 81mm. I decided to go different route and bought new Mahle cylinders and pistons so these are extra for me. These are available from various vendors, e.g. Design911 (code K9102).
Part Number: K9102 (actually K9102D100)
Dim: 80.94mm , clearance 0.06mm
Rings: 810XDS-3 Pin:WP017 Clip: CW22 (just copied what is says in the box :D )
Set is new and unused, and still in the box. EDIt: New price including shipping to UK is 550£ (Paypal ok, I paid quite a bit more... )
Pics below in (hopefully) last post.
/Ville
These are oversize pistons so you'll need to bore 80mm Birals to 81mm. I decided to go different route and bought new Mahle cylinders and pistons so these are extra for me. These are available from various vendors, e.g. Design911 (code K9102).
Part Number: K9102 (actually K9102D100)
Dim: 80.94mm , clearance 0.06mm
Rings: 810XDS-3 Pin:WP017 Clip: CW22 (just copied what is says in the box :D )
Set is new and unused, and still in the box. EDIt: New price including shipping to UK is 550£ (Paypal ok, I paid quite a bit more... )
Pics below in (hopefully) last post.
/Ville
Last edited by Project 911 on Sat Feb 01, 2020 5:49 am, edited 2 times in total.
Ville
*************
1967 911 resto-project
*************
1967 911 resto-project
-
- DDK above all
- Posts: 165
- Joined: Mon Apr 07, 2008 5:57 pm
- Location: Finland
Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new
Still for sale
Also happy to px for good original SWB front bumper, or 911R (gf) rear bumper assembly or other gf body parts. And probably to many other parts as well, cheaper or more expensive.
Also happy to px for good original SWB front bumper, or 911R (gf) rear bumper assembly or other gf body parts. And probably to many other parts as well, cheaper or more expensive.
Ville
*************
1967 911 resto-project
*************
1967 911 resto-project
-
- DDK above all
- Posts: 165
- Joined: Mon Apr 07, 2008 5:57 pm
- Location: Finland
Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new
Still for sale.
Pretty rough Birals can be used as diameter is 1mm more.
Pretty rough Birals can be used as diameter is 1mm more.
Ville
*************
1967 911 resto-project
*************
1967 911 resto-project
-
- Me and DDK sitting in a tree! KISSING
- Posts: 2696
- Joined: Thu May 21, 2009 2:54 pm
- Location: Kent
Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new
Surprised these haven't sold yet Ville. They would have worked for me, but i have decided to sell my SWB project
Got them flares on yet.
Dave
Got them flares on yet.
Dave
70T barn find...... to ST.
1998 C2 996 Kettle
1998 C2 996 Kettle
-
- DDK above all
- Posts: 165
- Joined: Mon Apr 07, 2008 5:57 pm
- Location: Finland
Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new
Flares will have to wait until my 67' resto is closer to finish (they'll go to 66' hotrod), next stage is finally paint. But flares are perfect, thanks!!stretch wrote:Surprised these haven't sold yet Ville. They would have worked for me, but i have decided to sell my SWB project
Got them flares on yet.
Dave
I believe these Wössner's would be fairly economical way and look/feel completely stock when using old Birals. My 67' project have taken so many years that plans have changed too many times, thus these un-used parts for decent discount vs what I paid. :D (not unique story I believe :D )
Ville
*************
1967 911 resto-project
*************
1967 911 resto-project
-
- DDK above all
- Posts: 165
- Joined: Mon Apr 07, 2008 5:57 pm
- Location: Finland
Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new
Still for sale
Ville
*************
1967 911 resto-project
*************
1967 911 resto-project
-
- DDK above all
- Posts: 165
- Joined: Mon Apr 07, 2008 5:57 pm
- Location: Finland
Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new
And still have these, new price 680£
Ville
*************
1967 911 resto-project
*************
1967 911 resto-project
-
- DDK above all
- Posts: 165
- Joined: Mon Apr 07, 2008 5:57 pm
- Location: Finland
Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new
One more try (before possible customs etc fun from EU...), 660£ shipped
Ville
*************
1967 911 resto-project
*************
1967 911 resto-project
-
- DDK above all
- Posts: 165
- Joined: Mon Apr 07, 2008 5:57 pm
- Location: Finland
Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new
It seems I like to hold these forever, price is 550£ including shipping to UK. Edited also initial post.
Ville
*************
1967 911 resto-project
*************
1967 911 resto-project