Help on Fuchs

Need some help with a technical problem - ask away and let's see if we can all help.

Moderators: hot66, impmad2000, Nige

Post Reply
Archie
DDK Fanatic
Posts: 81
Joined: Thu Jan 20, 2011 6:59 pm
Location: Northants

Help on Fuchs

Post by Archie »

Hi all, I've purchased a pr of 6" & 7" all 15" .. so buzy studying for cracks etc I didn't even notice one is a deep 6 & the other a flat 6 !! wot an arse .. never mind i'll do a swap on the flat 6.
My main issue is with the 7's .. the only stamp is 7x15 that's it, no part # or date stamp !!
Did at any point they stop ID details .. they certainly look genuine & have some age about them.
The guy I brought them of was as clueless as me :roll: .. any thoughts.
Thanks Archie

Image

Image
arprea
DDK Fanatic
Posts: 86
Joined: Wed Jan 17, 2007 6:03 pm
Location: Finland

Re: Help on Fuchs

Post by arprea »

The part numbers were sometimes really odd e.g. I have a pair of deep 6 with the 5,5 codes. Others has seen this as well, they used the forging molds at the factory for different widths. At least some of 4,5 wheels did not have markings at all. My 7R wheels have the last two digits ground of. Best way to identify is to look inside of the wheel - the forms in the center and spokes in genuine wheels van be easily identified.
Lightweight_911
Nurse, I think I need some assistance
Posts: 18011
Joined: Wed Nov 12, 2003 10:48 pm
Location: Worcs/W Mids border

Re: Help on Fuchs

Post by Lightweight_911 »

Several characteristics of those wheels suggest they're replicas ...
Andy

“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
Archie
DDK Fanatic
Posts: 81
Joined: Thu Jan 20, 2011 6:59 pm
Location: Northants

Re: Help on Fuchs

Post by Archie »

Thanks arprea, both 6" have part & date numbers. Nothing in the centers of the 7's where the date stamp should be.

Wot makes you think that Andy !
They are good quality & have some age & weight to them .. wouldn't repros have some id marks on them. The repros I've seen look pretty obvious .. even with my limited knowledge !
Cheers Archie
Lightweight_911
Nurse, I think I need some assistance
Posts: 18011
Joined: Wed Nov 12, 2003 10:48 pm
Location: Worcs/W Mids border

Re: Help on Fuchs

Post by Lightweight_911 »

Archie - just a few indicators:


Image

- the 'apex' of the triangular holes (red arrow) is too 'pointed'

- the depth of the 'upstand' (pale blue arrow) is too great

- the appearance/profile of the outer rim (blue rectangle) is too rough/thick
Andy

“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
Archie
DDK Fanatic
Posts: 81
Joined: Thu Jan 20, 2011 6:59 pm
Location: Northants

Re: Help on Fuchs

Post by Archie »

Thanks for your time & help Andy .. yeah I did wonder about those chunky rims.
Any idea who made them/UK !
Thanks again.
Nick Moss
Nurse, I think I need some assistance
Posts: 9424
Joined: Sat Nov 08, 2003 6:59 pm
Location: East Sussex
Contact:

Re: Help on Fuchs

Post by Nick Moss »

Definitely repros
Nick Moss - early911.co.uk - Fuchs refurbishment
07980 017994
nick@early911.co.uk
User avatar
KS
Nurse, I think I need some assistance
Posts: 15778
Joined: Fri May 07, 2004 3:12 pm
Location: Cornwall

Re: Help on Fuchs

Post by KS »

I suspect they're Eagles – among the first repros and always used to show up at US swapemeets. Heavy - and don't hit a kerb sideways with one.
Keith Seume
Follow on Instagram @orange914
My YouTube channel
Archie
DDK Fanatic
Posts: 81
Joined: Thu Jan 20, 2011 6:59 pm
Location: Northants

Re: Help on Fuchs

Post by Archie »

Thanks Nick.
That's interesting, cheers Keith.
Bit disappointed at first .. but I paid £400 the lot, so still happy.
Thanks again.
Archie
Post Reply