Managed to dent hub grrrr

bonerp · Post by **bonerp** » Fri Feb 04, 2011 9:21 am

Feck it - bought some very loverly nipple super type hub caps from Roger Bray and they are such a tight fit to my 4 stub wheels that managed to dent one. feck feck feck.

Any ideas whether it can be heated out?? Or is it a case of buying another?!

I might use this one to see if I can reduce the pressure required to push it on - for example by slightly bending out the securing ring.

butzsi · Post by **butzsi** » Fri Feb 04, 2011 12:39 pm

Hi,

If you need another I have 2 new old stock ones with crests available, let me know.

Chris

oliver365 · Post by **oliver365** » Fri Feb 04, 2011 1:23 pm

I also had crap time denting hubs trying to get them to fit or falling off while turning !I think its the 4 studs giving the probs, luckily I only got cheap baby moons & not expencive Rodger brays good luck Bonerp

bonerp · Post by **bonerp** » Fri Feb 04, 2011 1:36 pm

butzsi wrote:Hi,

If you need another I have 2 new old stock ones with crests available, let me know.

Chris

are these the same as the RB ones? How much are you looking for?

butzsi · Post by **butzsi** » Fri Feb 04, 2011 3:07 pm

pm sent

Chris

356california · Post by **356california** » Fri Feb 04, 2011 11:29 pm

i know a very good 'dent man' in the west midlands area if that helps?