73RS Lightweight Door Panels - Pictures please

Highfield · Post by **Highfield** » Mon Nov 30, 2009 3:02 pm

Can anyone post a detailed set of pictures of the RS Lightweight Door Panels.

I want to note in particular the positions of the fixings etc. for when I refit mine over the winter. I have purchased a set from Southbound including the pull and Fiat 500 handle etc.

I also need to get a set of the membranes that go on the door first - £££ from Porsche so does anyone know of an alterntive supplier or material that can be used ?

Ian

Mike · Post by **Mike** » Mon Nov 30, 2009 3:20 pm

my old car's interior with said door panel. The backing board from Southbound will have the cut outs already marked depending on model and Dave should also have the plastic waterproofing material. Failing that any thin sticky backed plastic membrane should do.

Highfield · Post by **Highfield** » Mon Nov 30, 2009 3:42 pm

Unfortunately Dave said that they had not been able to get hold of the backing mambrane material lately, but the Porsche items are about £25 each he said

Do you have any more detailed shots of the dash, doors, rear three quarters from your old car - e-mail to me if you have good high res - please.

I want to get them 'right'.

Ian

Gary71 · Post by **Gary71** » Mon Nov 30, 2009 5:29 pm

Highfield wrote:Unfortunately Dave said that they had not been able to get hold of the backing mambrane material lately, but the Porsche items are about £25 each he said

Ian,

I used black polythene from B&Q with spray trim adhesive

I'm never one to follow the correct route

jtparr · Post by **jtparr** » Mon Nov 30, 2009 9:44 pm

Ian

see this thread as I asked the same question a couple of years back for my car

http://www.ddk-online.com/phpBB2/viewto ... highlight=

regards
Jonathan

sng45 · Post by **sng45** » Mon Nov 30, 2009 9:59 pm

Mike wrote:my old car's interior with said door panel. The backing board from Southbound will have the cut outs already marked depending on model and Dave should also have the plastic waterproofing material. Failing that any thin sticky backed plastic membrane should do.

Please could you tell me what make/model those seats are and if possible where I might be able to buy a pair
Thanks
Steve

johndglynn · Post by **johndglynn** » Mon Nov 30, 2009 10:07 pm

Check that price from Porsche. I have the genuine membranes on my cars and they are great - and re-usable.

NigelC210 · Post by **NigelC210** » Mon Nov 30, 2009 11:01 pm

Ian
Genuine membranes available from www.mbscarparts.com
Jeremy (Tripe) on impactbumpers.
I paid £30 for a pair last year.

hot66 · Post by **hot66** » Mon Nov 30, 2009 11:02 pm

sng45 wrote:
Mike wrote:my old car's interior with said door panel. The backing board from Southbound will have the cut outs already marked depending on model and Dave should also have the plastic waterproofing material. Failing that any thin sticky backed plastic membrane should do.

Please could you tell me what make/model those seats are and if possible where I might be able to buy a pair
Thanks
Steve

I'm not sure if this is were where mIke got his from, but I gather these are really good reps :

http://www.rsl-classic.de/pages_en/clas ... seats.html

Highfield · Post by **Highfield** » Tue Dec 01, 2009 7:13 am

I will check the OPC price and contact Tripe.

Thanks,

Ian

Guy · Post by **Guy** » Tue Dec 01, 2009 10:42 am

Door panel membranes $7 a pair from Appbiz.

Guy

Highfield · Post by **Highfield** » Tue Dec 01, 2009 1:08 pm

Thanks Guy - will investigate shipping costs as well.

Ian

210bhp · Post by **210bhp** » Wed Dec 02, 2009 6:55 pm

Pair for sale. Be quick

http://forums.pelicanparts.com/porsche- ... anels.html

Regards
Mike

Highfield · Post by **Highfield** » Wed Dec 02, 2009 7:18 pm

Door panel kit already ordered from Southbound.

Membranes ordered from Appbiz (super helpful chap there - Bob) as Tripe didn't ahve any and Porsche are £25 each.

Appbiz are $7 plus $12 shipping equates to £11 for a set.

Ian