Triple Weber linkage

cameron · Post by **cameron** » Fri Feb 08, 2008 11:33 am

Anyone out there got a triple Weber linkage set up going spare. My carbs are complete but I'm missing most of the linkage parts. If not would anyone be able to take a few pics of their set up so that I can get one made up.
Thanks
Cameron

Lightweight_911 · Post by **Lightweight_911** » Fri Feb 08, 2008 11:51 am

I've certainly got a cross-shaft & the brackets that attach to each carb - might have some other bits too.

I'll check today & report back.

cameron · Post by **cameron** » Fri Feb 08, 2008 12:04 pm

Nice one andy, let me know how much.
Cheers
Cameron

stevieboy · Post by **stevieboy** » Fri Feb 08, 2008 12:43 pm

If your not in a rush I can take some pics next week for you.

cameron · Post by **cameron** » Fri Feb 08, 2008 12:59 pm

Thanks Steve, that would be great
Cameron

Mike911scrs · Post by **Mike911scrs** » Fri Feb 08, 2008 7:47 pm

HI Cameron
is this any good for you , I will be lifting the engine out on Sat' and could take some sizes for you if you like??

thay are PMO carb's and the linkage is close to what you require.

regards mike

Lightweight_911 · Post by **Lightweight_911** » Fri Feb 08, 2008 7:50 pm

Cameron - this is what I have:

cameron · Post by **cameron** » Sun Feb 10, 2008 9:12 pm

Thanks Mike, the pics are perfect. It looks like Andy has the parts I'm missing.
Cameron