Muffler skirt '72/'73 911

left4dead · Post by **left4dead** » Tue Jan 15, 2008 10:29 am

Has anyone come across a supplier of this piece of trim? Or do they come up for sale often?

early2.2S · Post by **early2.2S** » Tue Jan 15, 2008 9:14 pm

Hi,
i was looking myself for a muffler skirt approx three years ago and couldn't find one. As a result a friend and i made up some muffler skirts from an original. They are slightly thicker gauge stainless steel as the originals used to dent/mark easily.
If you are interested let me know. Price is not cheap - GBP 275 - due to the cost of the equipment used to make it. I believe we have three sets left at the moment.
Regards
Stuart

210bhp · Post by **210bhp** » Wed Jan 16, 2008 10:07 am

Stuart

Do you have a good photo of your skirt fitted to a car and one with the complete kit laid out before fitting?

Regards
Mike

left4dead · Post by **left4dead** » Wed Jan 16, 2008 10:08 am

Thanks for the reply Stuart.

Do you have any photos of the item (free standing or in situ)?

That would be great, thanks again.

left4dead · Post by **left4dead** » Wed Jan 16, 2008 10:09 am

Mike,

SNAP!!!

Alan @ CanfordClassics · Wed Jan 16, 2008 12:53 pm

Hi,

I have some taken whilst doing some work on Stuarts car. Let me have a look..........

Alan

Alan @ CanfordClassics · Wed Jan 16, 2008 1:06 pm

Barry · Post by **Barry** » Wed Jan 16, 2008 4:14 pm

Light-bulb moment!

I was using one of the original quarter bumpers from my car on another project yesterday, and noticed some well-spaced, factory looking holes at the base. Didn't think much of it until now. Looks as though mine would have had a set in an earlier life.

If it ever goes back to Leaf Green, I'll have to put a set back on

.

58A - 71E · Post by **58A - 71E** » Wed Jan 16, 2008 5:03 pm

Have also been on the lookout for one of these for quite some time now ever since I saw this picture over on Pelican (now stored in my favourites) showing one fitted to another Albert Blue 2.2

Stuart, do you have any pics (closer than the one above) of it on your car? I am very interested in one of your spares

Cheers

58A - 71E · Post by **58A - 71E** » Wed Jan 16, 2008 5:05 pm

Follow up post -

Does anyone know if these were only originally fitted to the 72/73 year cars?

Ferry Man · Post by **Ferry Man** » Wed Jan 16, 2008 5:29 pm

James, those were available other years too.
They came in a SWB version and a LWB type. The corner sections are a different length.

Ferry Man · Post by **Ferry Man** » Wed Jan 16, 2008 5:30 pm

Barry wrote:noticed some well-spaced, factory looking holes

Yeah, you do need to drill into the bumper to fit these.

Ferry Man · Post by **Ferry Man** » Wed Jan 16, 2008 5:39 pm

Here's an original one I've got salted away.
Only trouble is.... I don't have the third component.

It's tricky finding originals of these but probably impossible to find someone with just part of one.
I've seen complete skirts go for about £400, one went on German eBay for nearly 700 Euros.

Alan @ CanfordClassics · Wed Jan 16, 2008 6:33 pm

Hi,

More pics and info on this old Pelican thread

http://forums.pelicanparts.com/showthre ... ht=muffler

Ferry Man · Post by **Ferry Man** » Wed Jan 16, 2008 7:14 pm

And some more detail pics..