DDK - Die Deutschen Klassiker

Thanks for that. Very helpful & shows the torque holds up.

Also, if anyone has a damaged cam of this spec with at least one measurable lobe, please let me know.

It’s a stretch but you never know.

Thanks Keith, I did wonder what you were using.

86A has a bit more duration without pushing the lift so far. So imagine it’s got less aggressive ramps.

If you have a dyno chart I’d be interested to see the torque curve shape (actual numbers is less important).

Hello. I’ve got a project type4 engine which I’m collecting parts for. My current thinking is to go with a small capacity turbo engine but I do have both the 1.7 & 2.0 cranks to choose from. Im always looking to maximise the performance to cost ratio so won’t be going that extreme. The biggest p...

Ideally it will get a turbo too (Ruf fanboy who wishes he’d bought CTR#29 when I could have afforded it) but finding a way to package the intercooler discretely is tricky.

Bit closer photo since you were kind enough to ask….

Hope everyone made good use of the lovely weather over the weekend. Doubt we can squeeze that many more days out of it….. unless you live In Cornwall. Great pic and makes a change of just seeing pics of slammed type2’s . What’s the specs of the cars or are they stock ish Thanks [emoji4] The red car...

Hope everyone made good use of the lovely weather over the weekend. Doubt we can squeeze that many more days out of it….. unless you live In Cornwall.

The bugpack one is NLA. CB Performance do one with small gears (21mm on the pressure side). There is a nice but expensive German pump from TP. Fitting them behind the stock cooling fan shroud might be a problem. I think Jim C also had the original Salzburg rally pump remade but that was designed for...

It’s got Air Con too

Have a look at campershack on Facebook. No personal experience. However they are used to the problems with getting parts for those engines (camshafts are unobtainable in the correct spec for the DJ and rebuilders do throw in the 1.9 cam which isn’t the same). Similarly, the clips on the rocker shaft...

Creality Ender3 V2. With 2 upgrades, the Creality “touch” probe which maps the surface of the bed to allow for imperfect level and the Creality “spider” HotEnd which can be run at a higher temp for the Nylon filament. It’s definitely hobby grade & needs careful setup. It’s has a well supported c...

Wheels will be refurbished & probably in black so it should do the job.

Another small design. The OE centre caps don’t fit over the spindle nut so I needed a design with clearance underneath. You can see the nut problem here. https://uploads.tapatalk-cdn.com/20230805/8ebeb26cc9b487b22a8f30f46405cfff.jpg Few measurements & a bit of cad .. https://uploads.tapatalk-cdn...

Are you running sequential injection or batch fire? CB Performance do a cam sync that fits in the distributor bore & gives you that option (hall sensor, so falling trigger signal).