DDK - Die Deutschen Klassiker

Wood eye ??

Negative .... are you thinking location ? Have thought of this - location of torsion tube is good , and I don't plan to disturb it - will plate over existing set up - bosses dressed flush and drilled out as necessary and "adjust" height of new bosses so that pinch on torsion bar bush remai...

Nick, this would be fine if the original bosses were in reasonable condition - nine are not - so much so that one of them is missing altogether ... plated over, then some engineering **** had gone to the bother of attaching the spacer to the remains of this 4th bolt - so to the casual onlooker , it ...

Does anyone have a drawing showing the four hole centre positions , relative to each other and the centreline of the torsion bar ?(I am making up a lazer cut reinforcing plate ... which will have new bosses welded into it.... and it would make things easy for me - measuring is possible but not to th...

Try using heat from the opposite side (I used oxy/a) , then a paint scraper to "peel off" the covering. Trial and error to get heat level right - too cold and it won't come away easily , too hot and it simply fries.
Suspect an easy way does not exist !!

Numbers - no idea. Value comes down to three things - condition , condition and condition. I looked for a while to find a car for conversion to rally car (had to be RHD). Have spent 460 hrs so far on bodywork - guess total will be 1000 to 1200 ... do the sums ! Value could be from £3K to £33K + ... ...

Should I have put this in under vehicles for sale ? It's "mate" advertised there recently , albeit rolling , didn't sit around for long !

Historic stage rallying ... since 1993. up to recently in a Mk1 Cortina , did the Manx event for the last two years in borrowed minis (hmm) , now building a '66 911 from ground up .. should be out sometime next yr ?? Nothing to beat 60mph average over tight twistly roads on pace notes. Have also spr...

Sounds like we were in a similar club ... re sub-arc. Guess who used to make pressure vessels for GEC ?? ... how about 12" thick .... narrow gap. Now I'm delighted to get welding anything over about 1.2mm !!
Oh the days of BS5500 and 410 Tonne vessels (not a typo !)

Unusual mounting of front anti roll bar !!

You should only have two , don't understand top / btm ?
I think they are still available OK

Thanks for the quick feedback !

I have a friend with a G series car (sorry !) , which has what looks to me like an RS engine (210 bhp , mechanical inj) - engine no is 6641435 - can anyone tell me what it is ? Chassis no looks right , at 9114610416 , which ID's it as a 1974 Carerra , which should be fitted with that engine ?? Pity ...

Anyone know flow rate of a 911 oil pump ? (Input side - assume std 1966 pump and turbo pump ... ie I'm looking for two figs for the two different pumps) ... I have some pipe loss calculations to do !! (all to do with oil tank in front .... )

Looks like we may have to start a DDK Irish section !