914 rolling body/chassis wanted
Moderators: drummerboytom, MdR
914 rolling body/chassis wanted
Hello
I brought a 914 which looked resonable, I've gone quite a bit in and realised that its very rusty and probably no good for me to personally restore. I like a good car and dont think id want one with repro panels all over it.
The cars complete and running, I took the motor and g'box out this past weekend to clean it all up (and likely were going to fit my spare 2.7L), but once again found more rust.
Anyone got a or know of a semi solid incomplete project car/roller for sale in the UK?
Cheers
I brought a 914 which looked resonable, I've gone quite a bit in and realised that its very rusty and probably no good for me to personally restore. I like a good car and dont think id want one with repro panels all over it.
The cars complete and running, I took the motor and g'box out this past weekend to clean it all up (and likely were going to fit my spare 2.7L), but once again found more rust.
Anyone got a or know of a semi solid incomplete project car/roller for sale in the UK?
Cheers
Last edited by POZE on Tue Feb 21, 2006 4:47 pm, edited 1 time in total.
1953 Barndoor 2.5L WRX
1955 T1 Oval
1958 T1 Vert
1985 911 Carrera
1955 T1 Oval
1958 T1 Vert
1985 911 Carrera
-
- DDK slapper chatter
- Posts: 454
- Joined: Mon Mar 08, 2004 11:06 pm
- Location: The brussel fields (Bedfordshire)
Why not bid for the 914 conversion (with 2.2 911 engine) on Ebay :
http://cgi.ebay.co.uk/Porsche-914-6-con ... dZViewItem
... its only at £2050 and already met its reserve.
http://cgi.ebay.co.uk/Porsche-914-6-con ... dZViewItem
... its only at £2050 and already met its reserve.
Roger -
1971 Gilbern Invader Mark II
1956 Terrot 125 EMS
2015 Skoda Octavia Estate
1971 Gilbern Invader Mark II
1956 Terrot 125 EMS
2015 Skoda Octavia Estate
-
- Nurse, I think I need some assistance
- Posts: 4319
- Joined: Tue Aug 24, 2004 8:50 pm
- Location: East Sussex
Just had a word with him: it seems as though he's after £6.5K for it. He's letting the auction run with virtually no reserve, but might well pull it before the end.
Busts my budget at that, as you're just about back into 911 money again. The only other thing is that the engine has only done a few trips since being built: would much prefer to see a few thousand settling in miles on it (no oil pressure gauge either so you'd be risking that as well). Sounded a nice bloke though.
Busts my budget at that, as you're just about back into 911 money again. The only other thing is that the engine has only done a few trips since being built: would much prefer to see a few thousand settling in miles on it (no oil pressure gauge either so you'd be risking that as well). Sounded a nice bloke though.
DDK Member1243 07741 273865. Now booking Spring '24. Home of the RY Austin 7 Trophy's
-
- Moderator
- Posts: 1402
- Joined: Wed Nov 12, 2003 9:38 pm
- Location: Powys
Re: 914 rolling body/chassis wanted
One just turned up on Flea-bayPOZE wrote: Anyone got any suggestions, or know of a semi solid incomplete project car/roller for sale in the UK?
Cheers
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :B:SS:UK:1
Alternatively Dave McKillop ( Growler914 on here i think ? ) still has his 914/4 which was looking for a new home .
He has robbed a few bits and pieces off it to complete his 914/6 restoration but could do a job for you .I'll pm you his email address.
drummerboytom
1970 914 / 6 Irish Green
1974 914 / 4 Giallo Fly ( yellow ! )
gone to a new DDK home - 1972 911 2.4T coupe with '73 2.4T CIS motor
gone to a new home - 1970 911 T Targa
1970 914 / 6 Irish Green
1974 914 / 4 Giallo Fly ( yellow ! )
gone to a new DDK home - 1972 911 2.4T coupe with '73 2.4T CIS motor
gone to a new home - 1970 911 T Targa
Hello DrummerboyTom
Thanks for the tip for Dave, i've sent him an email, so we can see what he has! cheers
I also saw the 914 on ebay last night, 99% rust free sounds very good... much better than mine, at maybe 50% rust free. This sounds good, but chances are it will go above my limit cash wise, maybe a 914 isnt viable for my financial situation at the moment.
I'll keep an eye on both anyway and let you know how it goes.
Check these rust pics:
[img]http://im1.shutterfly.com/procserv/47b6 ... 8UauW7Ro14
Thanks for the tip for Dave, i've sent him an email, so we can see what he has! cheers
I also saw the 914 on ebay last night, 99% rust free sounds very good... much better than mine, at maybe 50% rust free. This sounds good, but chances are it will go above my limit cash wise, maybe a 914 isnt viable for my financial situation at the moment.
I'll keep an eye on both anyway and let you know how it goes.
Check these rust pics:
[img]http://im1.shutterfly.com/procserv/47b6 ... 8UauW7Ro14
1953 Barndoor 2.5L WRX
1955 T1 Oval
1958 T1 Vert
1985 911 Carrera
1955 T1 Oval
1958 T1 Vert
1985 911 Carrera
Hi POZE,
I may have something of interest, sent you a PM
Barrie
I may have something of interest, sent you a PM
Barrie
www.904GTS.com
www.technic-motorsport.com
Factory built Safari 2.7 RS
Too many projects not enough time !
www.technic-motorsport.com
Factory built Safari 2.7 RS
Too many projects not enough time !
-
- DDK Fanatic
- Posts: 70
- Joined: Mon Jun 14, 2004 6:48 pm
- Location: Glasgow