Page 1 of 1
ignition lock question
Posted: Thu Nov 20, 2025 1:17 pm
by cschmueck
Hi, does anyone here know if the ignition lock of a 993 will work in a 1972 911T?
I have the dreaded starter lockout problem and have wired in a push button under the dash. Works fine, but I find it annoying...
Thanks in advance!
Christian
Re: ignition lock question
Posted: Sat Nov 22, 2025 6:59 am
by Ian Comerford
Looking on Type 911 it seems that it will do as the age range includes the 993 and goes back as far as 1970
https://type911shop.co.uk/epages/de867c ... ducts/3837
Re: ignition lock question
Posted: Fri Dec 19, 2025 12:46 pm
by cschmueck
Thanks Ian- I had not looked on here for a while- apologies. I have now found time tio attempt a repair. It was not the standard issue with the little pin though. the entire cruciform that operates the electrical parts has snapped off. I reckon irreparable- does anyone here have any suggestions/ experience with such a case?
Thanks!
1e4e57c9-856c-4878-8797-3e182d465daf.jpg
Re: ignition lock question
Posted: Fri Dec 19, 2025 1:43 pm
by Ian Comerford
I would try Tuthill Used Parts. They have a huge selection of used stuff and are very helpful. They advertise on Ddk in the Trade Wanted/Parts section.