1972 911T Horn Power/Fusing
Posted: Tue Oct 14, 2025 2:59 pm
Hi,
Further to my jacking/bumper removal enquiry, another newbie Q.
I need to kill the power to the horns which is on a permanent live feed, I assume there’s a relay somewhere with a fuse as I can’t see the horn mentioned on the fuse panel. I’ve tried the obvious feeds for the normally live lights, clock etc.
Any tips for locating/killing the power to them?
Alternatively I can just tape up the live horn connectors which are female but prefer to do it properly and also prefer not to disconnect the batts as it’ll bugger up the alarm etc.
Many thanks,
Kevin
Further to my jacking/bumper removal enquiry, another newbie Q.
I need to kill the power to the horns which is on a permanent live feed, I assume there’s a relay somewhere with a fuse as I can’t see the horn mentioned on the fuse panel. I’ve tried the obvious feeds for the normally live lights, clock etc.
Any tips for locating/killing the power to them?
Alternatively I can just tape up the live horn connectors which are female but prefer to do it properly and also prefer not to disconnect the batts as it’ll bugger up the alarm etc.
Many thanks,
Kevin