Compomotive Dage split rim Fuchs 1 x wheel centre or if not 15" wheel/wheels wanted

[914-6sw]

Can you help please? I am looking for 1 x Compomotive Dage split rim Fuch wheel centre (see pic) or if not 1 or 2 x 15" wheels preferable 9 " but can change to 9" so any size would help if you have.

What I have is what's in pic ( 2 x 8" and 1 x wheel centre ) what I need to end up with for my car is 2 x 8" and 2 x 9" so if you can help it would be most appreciated.
Mark

[Ian Gunney]

Mark - may be worth contacting Image Wheels - https://www.imagewheels.co.uk/ - they replaced the barrel on one of wheels I have - they did exactly as they said they would and were really easy to deal with.

[914-6sw]

Thanks Ian. I will try them for the inner and outer rims thanks for link. Just need to find another centre if I can or complete wheel/wheels

[911hillclimber]

I've passed your request to an ex-DDK'r who has located a set of 7 and 8" Dage rims for a project he has, but may not fit them.
I do not know if the 8" is a 2 part rim though.
If this works out he will contact you directly. He will fully understand what you need.

[914-6sw]

Still searching for 1 x Centre or 1 or 2 wheels

[914-6sw]

Still searching for the split rim wheel centre or 1 or 2 wheels 15" if anybody can help please

[James '72 Turbo]

Hello,

Not quite what you're asking for but they might be of interest....

I have a set of four 17" compomotives that wont suit my build so I'd be happy to sell. I cant see any markings showing the offset but I've just measured the rims at 11 inch width, both front and rear. The fronts are currently fitted with 275/40/17s and the rears have 315/35/17s.

I've got loads more photos if they are of interest.

Thanks,
James

[914-6sw]

Hi James,
Thanks but really after the split rim Fuchs style plus need 15".

Thanks
Mark

[markmws]

Hi Mark,

I've got a set of 9x 15 and 11 x 15 :

Let me know if you're interested.

Thanks
Mark

[markmws]

[jwhillracer]

Hi,

I have 2 sets of rims that will make 9.5" wide wheels, 5" outers and 4.5" inners, and one original Compomotive Dage centre.








They appear to be straight, and could do with a good clean and polish, having sat on my shelf for 10 years +

£600 plus carriage, although I would prefer collection.

If you want more photos, PM me with your email or WhatsApp

Cheers

JW

[914-6sw]

PM sent.
Thanks