What's inside this hole behind the bonnet latch? I'm sending these to envirostrip but there seems to be a fibrous material in here which I assume is going to be dissolved. Is this gonna cause me any problems, like is it holding the captive nuts in place?
Sent from my SM-G988B using Tapatalk
1970 - what's in this hole?
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2068
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
1970 - what's in this hole?
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
Re: 1970 - what's in this hole?
The large hole?
Its for the latch bolt to go into when its adjusted
Its for the latch bolt to go into when its adjusted
1966 912
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2068
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
Re: 1970 - what's in this hole?
I see what it's for but it's lined with a black fibrous material. Is that material doing anything important?SeanP wrote:The large hole?
Its for the latch bolt to go into when its adjusted
Sent from my SM-G988B using Tapatalk
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
Re: 1970 - what's in this hole?
It’s in there to trap moisture and not much else
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
1966 912
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s