Page 1 of 1
Threaded harness mounting plates on door sills
Posted: Thu Oct 19, 2023 3:47 pm
by matteo68
I’m looking for 2 of the above which are welded onto the door sills for the Repa harnesses to be attached to, per the below images if anyone has any please? Stretch?
Sent from my iPhone using Tapatalk
Re: Threaded harness mounting plates on door sills
Posted: Thu Oct 19, 2023 4:29 pm
by stretch
Ebay. Matt. FIA threaded harness spreader plate.
Re: Threaded harness mounting plates on door sills
Posted: Thu Oct 19, 2023 4:38 pm
by matteo68
Perfect, thanks Dave!
Re: Threaded harness mounting plates on door sills
Posted: Thu Oct 19, 2023 4:50 pm
by matteo68
What’s the Repa bolt size again please so I can get the right (rectangular) threaded plates?
Re: Threaded harness mounting plates on door sills
Posted: Thu Oct 19, 2023 4:56 pm
by Lightweight_911
.
Universal seatbelt mounting bolts/hardware are 7/16" UNF ...
.
Re: Threaded harness mounting plates on door sills
Posted: Thu Oct 19, 2023 5:03 pm
by matteo68
Thanks! They were all that size on eBay so I was beginning to assume that was the case but thanks for confirming!
Re: Threaded harness mounting plates on door sills
Posted: Thu Oct 19, 2023 5:12 pm
by matteo68
One more question: what happens with the other lower harness mounting (by the tunnel)? How is this attached?
Re: Threaded harness mounting plates on door sills
Posted: Thu Oct 19, 2023 8:01 pm
by stretch
Same as the outer. A little more care needed to clear the fuel lines /cables etc.
